JB 513C23 KNX Binary Output 3 x 6 A AC 120-277 V Resistive Load UL NEMA Junction Box Relay 5WG1513-4CB23
Product Overview
This built-in KNX binary output provides three independent relay channels at AC 120...277 V / 6 A for resistive loads, packaged for UL/NEMA junction-box installation. The 1/2 inch threaded connector and feedthrough wiring allow it to sit inside a standard North American junction box, turning a conventional electrical box into a three-channel KNX switching node.
Technical Specifications
| Outputs |
3 floating relay contacts; one relay contact per output |
| Current |
6 A per output per DIN EN 60669-1 (resistive load) |
| Voltage |
Rated contact operating voltage AC 120...277 V |
| Frequency |
50/60 Hz |
| Protection |
IP20 |
| Power |
Bus-powered electronics |
| Bus |
Integrated bus coupling unit; KNX TP via bus terminal block |
| Installation |
Built-in device with 1/2 inch thread for UL/NEMA junction box; function wires through threaded connector |
Key Features
- Per Output: Normal/time switch mode; NO/NC contact; status object; variable on/off delays; AND/OR logic
- Scenes: Integrated 8-bit scene control; each output linkable to up to 8 scenes
- Monitoring: Operating hours counter with threshold; load cycle counter with threshold
- Safety: Selectable state at bus voltage failure/recovery; warning signal before off
Dimensions & Documentation
Dimensions: 70 x 90 x 44.6 mm (WxHxD)
Data sheet: A6V11786008
Warranty: 24 Months
Applications
North American commercial multi-circuit control: office lighting rows, retail display circuits, hotel room lighting groups, restaurant scenes, school classroom banks where 120-277 V switching inside UL/NEMA boxes and KNX scene integration are required.