RL 513D23 KNX Binary Output 3 x 6 A AC 230 V Modular Relay
This modular KNX binary output combines three independent relay channels, each rated at 6 A for AC 230 V resistive loads, in a compact enclosure for automation module boxes. Each output can operate in normal or time-switch mode, with selectable NO/NC contacts, variable delays, logic functions, and night-mode timing. Operating-hours and load-cycle counters with thresholds support predictive maintenance.
Technical Specifications
| Outputs |
3 floating relay contacts; one relay contact per output |
| Current |
6 A per output per DIN EN 60669-1 (resistive load) |
| Voltage |
Rated contact operating voltage AC 230 V |
| Frequency |
50/60 Hz |
| Protection |
IP20 |
| Terminals |
Screwless terminals for 0.5...2.5 mm² conductors |
| Power |
Bus-powered electronics |
| Bus |
Integrated bus coupling unit; KNX TP via bus terminal block |
| Mounting |
AP 118 automation module box or AP 641 room control box |
| Dimensions |
48 x 87 x 36 mm (WxHxD) |
Key Features
- Normal/time switch mode operation per output
- Selectable NO/NC contact configuration
- Status object option with variable on/off delays
- AND/OR logic functions
- Integrated 8-bit scene control
- Each output linkable to up to 8 scenes
- Operating hours counter with threshold
- Load cycle counter with threshold
- Selectable switching state at bus voltage failure and recovery
- Warning signal before off
Documentation & Support
Data sheet: A6V11375522 | Warranty: 24 Months
Typical Applications
Multi-circuit room and zone control: office lighting rows, hotel bathroom circuits, residential multi-light scenes, display case lighting, small ventilation and pump circuits where three 6 A channels with scene and monitoring logic fit inside a module box.