N 525D11 KNX Switch Dim Actuator 2 Channel DALI Broadcast with Tunable White RGB 5WG1525-1DB11
This 2-channel KNX switch/dim actuator delivers DALI broadcast control for up to 20 electronic ballasts per output, combining switching, dimming, Tunable White color temperature, and RGB effects in a compact DIN-rail unit.
Technical Specifications
| Outputs |
2 DALI channels (DALI-2); up to 20 ECGs per output (40 total) |
| Voltage |
Max 19 V/output; short-circuit resistant |
| Power Supply |
Integrated AC 110–240 V / DC 120–240 V for electronics + output |
| Control |
Switching, dimming, Tunable White temp, RGB effects per output |
| Modes |
Normal, time-switch, blinking selectable per output |
| Logic |
Adjustable delay, value filter; AND/OR/NAND/NOR/XOR options |
| Dimming |
Adjustable ramp times; ON/OFF by dimming; 7 dimming curves |
| Status |
Min/max on request; cyclic/auto after change; state recovery; night mode warning |
| Override |
Permanent OFF, forced control, locking mode |
| Monitoring |
Operating hours + load cycle counting; 8-bit scene control into up to 8 scenes |
| Failure |
Luminance defect, voltage error, short circuit, no ECG — one per output |
| Buttons |
One pair per output (On/Off/dim); front deactivation with LED indicator |
| Housing |
DIN TH35 (DIN EN 60715); N-system; IP20; 72x90x60 mm; 4 TE width |
Key Features
- Ex-factory site function enables on/off via wall switches before commissioning
- Each channel drives a DALI line at 19 V short-circuit protected
- Multiple operating modes including normal, time-switched, and blinking
- Comprehensive dimming control with adjustable ramp times and curves
- Advanced monitoring with operating hours and load cycle counting
- Scene control capability for up to 8 scenes
Applications
Small-to-medium DALI zones: meeting rooms with 2 circuits, retail spaces, reception areas, and restaurants where 40 or fewer fixtures need grouped switching, dimming, and color-tuning with pre-commissioning functionality.
Data Sheet: A6V11914230 | Warranty: 24 Months