SAE 100 R14-2 Stainless Steel Braided PTFE Hose:
This hose shall consist of a non-conductive corrugation PTFE(polytetrafluoroethylene) inner tube, reinforced with one or two layers of stainless steel wire braid. The outer cover may be made from a variety of materials, including stainless steel braid, polyurethane, or PVC.

PTFE Braided Hose/ PTFE lines Application:

compressed air, gas, steam, fuel, oil, chemical and pharmaceutical products, particularly suitable for steam piping on injection moulding achines, diathermic oil installations, charging lines for cryogenic gas, compressor discharge lines, tomotive, pharmaceutical and food sectors. Solvents, pigments and paint transfer lines. Hydraulic lines in power stearing marine applications. Not suitable for molten alkali metals and halogens at high temperature.

Teflon is commonly known as polytetrafluoroethylene (PTFE), also known as Teflon, Teflon, F4, Plastic King, etc., and is a commonly used engineering plastic with excellent performance.

Excellent high temperature and low temperature resistance, long-term use at -65 ～ + 260 ℃: weather resistance, fire resistance, non-combustibility, high oxygen index, no water absorption, excellent radiation resistance, such as long-term exposure to the atmosphere, its surface and various The performance remains basically unchanged;

Excellent dielectric properties, high voltage resistance; excellent corrosion resistance, almost insoluble in any solvents, will not corrode in strong acid aqua regia, strong alkali concentrated light sodium oxide, strong corrosive uranium pentafluoride; good wear resistance The static friction coefficient is the smallest among plastics, and has excellent self-lubricating properties. It has special surface non-stickiness and good tensile strength.

Widely used in aerospac

PTFE Hose Size Chart: