The 70-100W Drone Signal Jammer Module is engineered for high-power, long-range control of unauthorized drone intrusions. It disrupts communication links between drones and their controllers, satellites, or other transmission sources by emitting strong, targeted interference signals, ensuring robust security in large-scale or critical protected areas.
Key Advantages:
Applicable Scenarios: Large airport no-fly zones, national security zones, military installations, extensive event venues, and other high-security environments requiring wide-area drone suppression.
Power | Bandwidth | Scheme | Size (Built-in Circulator) |
---|---|---|---|
70-100W | 420–480MHz | LDMOS | 170mm*94mm*27mm |
70-100W | 420–480MHz | GaN | 170mm*94mm*27mm |
70-100W | 420–480MHz | LoRa GaN | 170mm*94mm*27mm |
70-100W | 720–820MHz | LDMOS | 170mm*94mm*27mm |
70-100W | 720–820MHz | GaN | 170mm*94mm*27mm |
70-100W | 720–820MHz | LoRa GaN | 170mm*94mm*27mm |
70-100W | 850–950MHz | LDMOS | 170mm*94mm*27mm |
70-100W | 850–950MHz | GaN | 170mm*94mm*27mm |
70-100W | 850–950MHz | LoRa GaN | 170mm*94mm*27mm |
70-100W | 970–1100MHz | LDMOS | 170mm*94mm*27mm |
70-100W | 970–1100MHz | GaN | 170mm*94mm*27mm |
70-100W | 970–1100MHz | LoRa GaN | 170mm*94mm*27mm |
70-100W | 1170–1280MHz | LDMOS | 170mm*94mm*27mm |
70-100W | 1170–1280MHz | GaN | 170mm*94mm*27mm |
70-100W | 1170–1280MHz | LoRa GaN | 170mm*94mm*27mm |
70-100W | 1550–1650MHz | LDMOS | 170mm*94mm*27mm |
70-100W | 1550–1650MHz | GaN | 170mm*94mm*27mm |
70-100W | 1550–1650MHz | LoRa GaN | 170mm*94mm*27mm |
70-100W | 2300–2500MHz | LDMOS | 170mm*94mm*27mm |
70-100W | 2300–2500MHz | GaN | 170mm*94mm*27mm |
70-100W | 2300–2500MHz | LoRa GaN | 170mm*94mm*27mm |
70-100W | 5150–5350MHz | LDMOS | 170mm*94mm*27mm |
70-100W | 5150–5350MHz | GaN | 170mm*94mm*27mm |
70-100W | 5150–5350MHz | LoRa GaN | 170mm*94mm*27mm |
70-100W | 5400–5700MHz | LDMOS | 170mm*94mm*27mm |
70-100W | 5400–5700MHz | GaN | 170mm*94mm*27mm |
70-100W | 5400–5700MHz | LoRa GaN | 170mm*94mm*27mm |
70-100W | 5725–5850MHz | LDMOS | 170mm*94mm*27mm |
70-100W | 5725–5850MHz | GaN | 170mm*94mm*27mm |
70-100W | 5725–5850MHz | LoRa GaN | 170mm*94mm*27mm |
Test Item | Technical Parameters | Unit | Remark |
---|---|---|---|
Frequency Range | 420–5850 | MHz | Customized Frequency Supported |
Operating Voltage | 28 (28–32V compatible) | V | Wide Voltage Adaptation |
Maximum Power Output | 50±0.5 | dBm | 100W@≤7A |
Gain | 45±1 | dB | peak-to-peak value |
In-band Fluctuation | ≤2 | dB | peak-to-peak value |
Spurious Emission (Operating In-band) | ≤-15dBm/1MHz | dBm | Center Frequency + CW Signal to Maximum Power Output Test |
Spurious Emission (Operating Out-of-band, 9KHz–1GHz) | No noise wave above normal base | dBm | – |
Spurious Emission (Operating Out-of-band, 1G–12.75GHz) | No noise wave above normal base | dBm | – |
Output VSWR (No Power Up) | ≤1.30 | – | No power up: Standard Grid Output -10dBm |
Output VSWR (Power Up) | ≤1.30 | – | Power up: Dual Directional Coupler Test |
High-low Temperature Test (Operating Ambient Temperature) | -10~+55 | °C | Cold Start Compatible |
High-low Temperature Test (Gain Stability) | ±1.5dB @ -40°C~+55°C | dB | – |
High-low Temperature Test (Power Stability) | ±1dB @ -40°C~+55°C | dB | – |
Power Supply Requirement | ≥8A@+28Vdc | – | Continuous Wave Output (100W) |
Power Supply Port | Power Cable: Red positive/Black negative | – | Red positive, Black negative polarity |
RF Output Connector | SMA | – | SMA External Screw Base |
A: The module’s 70-100W high power output enables long-range interference coverage, making it ideal for large sites (e.g., major airports, extensive event venues). Its broad frequency band support also ensures compatibility with most commercial drone communication protocols.
A: - LDMOS: Delivers stable performance at a balanced cost, suitable for general high-power drone jamming.
A: Yes. Customized Frequency is supported (see “Customized Frequency" in “Frequency Range" remark). For bulk orders, customization of voltage (beyond 28–32V), form factor, or connectors can also be discussed.
A: Yes. The operating temperature range is -10°C to +55°C, and it undergoes rigorous high-low temperature testing (gain fluctuation ≤±1.5dB, power fluctuation ≤±1dB), ensuring reliability in harsh outdoor environments.
A: The module requires ≥8A@+28Vdc for power (to support 100W continuous wave output). The power cable uses “Red positive, Black negative" polarity. RF signals output via an SMA external screw base. Ensure correct power polarity and RF connector compatibility during installation.