The TDS-3 heading sub-compass is a new type of sub-compass, which is compact and can be installed in recessed, wall-mounted or desktop type. It can transmit the ship's heading indicated by the electric compass to any place on the ship where the ship's heading is needed, and it adopts the internal electronic technology and computer technology. If the electric compass signal is analogue, you can use our analogue-to-digital converter to convert the analogue signal into a digital signal before connecting it to this machine.
Ⅱ Performance Indicators
Dimensionsand Weight
Dimensions
See outline dimensions diagram
Weight
Approximately 11 kg
Mechanical Parameters
Resolution
0.1°
Reading Accuracy
< 0.5°
Protection Level
IP56
Electrical Parameters
Voltage
24VDC
Power Consumption
Approximately 6W
Heading Serial Interface
RS485 or RS422
Other Parameters
Operating Temperature
-25°C to +70°C
NMEA Interface
Baud Rate:4800 / 1 Start Bit / 1 Stop Bit, No Parity; Supported statement information must comply with the WIEA-0183 protocol standard version 2.00.
The following formats are supported for heading statements: