The iSE612 is an uncooled IR thermal camera core from the iSE series. Featuring a 640x512/12μm uncooled infrared detector, comprehensive optical components, signal processing circuitry, and advanced image processing algorithms, this thermal imaging core delivers exceptional image clarity and superior performance.
Designed for versatile applications including Industrial Vision, Firefighting and Rescue, Security Surveillance, Outdoor Observation, Machine Vision, and Consumer Electronics.
| Model | iSE612 | |
|---|---|---|
| IR Detectors Indicators | ||
| Sensitive Material | VOx | |
| Resolution | 640×512 | |
| Pixel Size | 12μm | |
| Spectral Response | 8μm ~ 14μm | |
| Typical NETD |
≤20mK |
|
| Image Processing | ||
| Digital Frame Rate | 50Hz | |
| Start-up Time | 6s | |
| Digital Video | YUV420/YUV422/RGB888/RAW | |
| Image Algorithm | NUC/DRC/DNS/DDE/SFFC | |
| Shutterless | Supported | |
| Image Display | 10 Types (White Hot/Lava/Iron Red/Hot Iron/Medical/Arctic/Rainbow1/Rainbow2/Tint/Black Hot) | |
| Image Direction | Horizontal/Vertical/Diagonal | |
| Digital Zoom | 1x/2x/4x/8x | |
| Compensation Mode | Manual | |
| Electrical | ||
| Standard External Interface | 50pin: BP040SB-50-0114-B-R0 | |
| Communication Interface | TTL-232/USB2.0 | |
| Digital Video Interface | DVP8/BT.656/DVP16/BT.1120/USB2.0/MIPI-DSI-4LANE | |
| Extension Components | USB2.0/SDI/HDMI/GIGE/Cameralink/VPC/MIPI-CSI-2LANE | |
| Electrical Interface | ||
| Supply Voltage | 2.7V~5.3V | |
| Typical Power Consumption | 0.8W@50Hz@23±3℃ | |
| Mechanical/Lens | ||
| Bare Core Size | 25.4×25.4×22.7mm | φ36×24.3mm |
| Bare Core Weight | 26±1.5g | 28±1.5g |
| Optical Lens | Fixed Focus Athermal: 4.8/9.1/13/19mm |
|
| Impact | Half Sine Wave, 40g/11ms, Impact Direction X Axis, 3 times | 1500g@0.4ms |
| Vibration |
5.35g, Random Vibration, 3-axis |
|
| Shutter Components | Optional | |
| Environmental Adaptability | ||
| Operating Temperature | -40℃~+70℃ | |
| Storage Temperature | -45℃~+85℃ | |
| Humidity | 5%~95%, non-condensing | |
| Certification | ROHS2.0/REACH | |
There are currently two types of infrared thermal imaging sensors on the market: cooled and uncooled.
Uncooled IR detectors operate at ambient temperature. Based on semiconductor technology, they can be manufactured in large volumes with small size and low cost, making them ideal for portable/handheld/mobile devices.
Cooled IR detectors are packaged in units that maintain extremely low temperatures using cryo coolers. They are larger, more expensive, and less reliable than uncooled sensors due to complex cooling systems. However, cooled systems offer exceptional sensitivity and typically work with long focal length optics for long-range applications.
For non-destructive testing: Simple to test and quick to respond without causing damage, resulting in cost savings, increased work efficiency, and reduced manpower and equipment depreciation.
For medical thermography: Highly efficient for detecting hidden health issues, 100% safe without radiation or pain, making it an ideal tool for early health screening.