E-mail: wisdomlongkeji@163.com

Cellphone: +0086-13534205279

• The rotation angle of the motor is proportional to the input pulse.
• The motor has full torque at standstill (if the windings are energized)
• Precise positioning and repeatability of movement since good stepper motors have an accuracy of 3 – 5% of a step and this error is non cumulative from one step to the next.
• Excellent response to starting/ stopping/reversing.
• Very reliable since there are no contact brushes in the motor. Therefore the life of the motor is simply dependant on the life of the bearing.
• The motors response to digital input pulses provides open-loop control, making the motor simpler and less costly to control.
• It is possible to achieve very low speed synchronous rotation with a load that is directly coupled to the shaft.
• A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the input pulses.

Avoid getting thinner on other parts of the Servomotor when cleaning the shaft.

When the Servomotor is to be stored with the power cable disconnected, store it in the following temperature range:

Between −20°C and 60°C

The Servomotor SGM and SGMP types are designed for indoor use.

Install Servomotor in an environment which meets the following conditions:

1. Free from corrosive and explosive gases
2. Well-ventilated and free from dust and moisture
3. Ambient temperature of 0 to 40°C
4. Relative humidity of 20% to 80% (non-condensing)
5. Inspection and cleaning can be performed easily

If the Servomotor is used in a location subject to water or oil mist, install a shield cover over the Servomotor.

The Yamakawa sgmgv series servomotor is a spare part used for PLC / CNC automation parts. Our company is supplying huge spare and replacement parts in cooperation with major manufacturers of industrial automation machinery and PLC systems.

Yaskawa Drives & Motion Division

Sigma-5 Servo Motors, SGMGV, 200V, rated output = 1.3 kW, with 24VDC Brake
SGMGV-44A3A6E

• Super high power rate (Extremely low inertia)
• Instantaneous peak torque (300% of rated torque)
• Mounted high-resolution serial encoder: 20 bits
• Maximum speed: 6,000 min-1
• Wide selection: 50 W to 1.0 kW capacity, holding brake and gear options

1. Semiconductor equipment.
2. Chip mounters
3. PCB drilling stations
4. Robots
5. Material handing machines
6. Food processing equipment