Industrial 4Ch RS-232 Serial To Fiber Converter
Industrial Ethernet Switch Serial to Fiber Converter Advantages:
Serial to Fiber Converter Technical Indexes
| RS232 Serial Interface | |
| Physical interface | Industrial standard screw terminal |
| Data type | Up to 16Ch RS232 Bi-Direction |
| RS-232 signals | TxD, RxD, GND |
| Serial port line distance (copper) | 15 meters |
| Baud Rate | 0 ~ 800kbps |
| RS422 Serial Interface | |
| Physical interface | Industrial standard screw terminal |
| Data type | Up to 8Ch RS422 Bi-Direction |
| RS-422 signals | Tx+, Tx-, Rx+, Rx-, GND |
| Serial port line distance (copper) | 1000 meters |
| Baud Rate | 0 ~ 800kbps |
| RS485 Serial Interface | |
| Physical interface | Industrial standard screw terminal |
| Data type | Up to 16Ch RS485 Bi-Direction |
| RS-485 signals | Data+, Data-, GND |
| Serial port line distance (copper) | 1000 meters |
| Baud rate | 0 ~ 800kbps |
| Power Requirements | |
| Power input | 12~48VDC |
| Power consumption | <6W |
| Power connector | Terminal block |
| Power protection | Reverse polarity protection |
| LED Indicator | |
| PWR | Power Supply |
| FL | Fiber Link Status |
| Data 1~16 | Serial Data Signal |
Serial to Fiber Converter Overview
E-link LNK-IRS series is an industrial grade Multi-Channel RS232/RS485/RS422 to fiber optic converter which converts a
standard RS232/RS485/RS422 signal to a fiber optic link as to extend the signal up to 2KM on multimode fiber and 20KM on single mode fibe

Ordering Information
| Model | Description |
| LNK-IRS232-C04-SFP | Industrial 4Ch RS-232 Serial to Fiber Converter, SFP Port (not including SFP modules), -40°C ~ 80°C |
| Mounting Options | ► Default DIN-Rail Bracket installed |
| Power Options | ► DIN-Rail Power Supply. Open Wire for Terminal Block |
| ► Power Supply needs to be purchased separately |