Fanless 802.3at Power Over Ethernet Splitter Output Voltage 19VDC
Industrial 10/100/1000Mbps 802.3at PoE+ Splitter Output Voltage 19VDC
PoE Power Splitter Advantages
► Splits power and data from PoE Input
► Short-circuit protection for power output
► IP40 rugged metal housing and fanless
► Support DIN-Rail & Wall-mount installation
► Extensive LED indicators for PoE diagnostics
►Wide operating temperature -40 ~ 80°C
Technical Indexes
| Ethernet | |
| Standards: | IEEE 802.3 10Base-T Ethernet | 
| IEEE 802.3u 100Base-TX Fast Ethernet | |
| IEEE 802.3ab 1000Base-T Gigabit Ethernet | |
| IEEE 802.3af Power over Ethernet | |
| IEEE 802.3at Power over Ethernet Plus | |
| Processing Type: | Forward | 
| Half-duplex, Full-duplex | |
| Forward Filter Rate: | 1,488,000pps (1000Mbps) | 
| Cabling: | 1000Base-T: Cat5 or above | 
| Maximum Distance: | Cat5 UTP up to 100m | 
| Interface: | “PoE (Power + Data)” Input Port: 1 x RJ-45 10/100/1000Base-T | 
| “Data” Out Port: 1 x RJ-45 10/100/1000Base-T | |
| DC Out Plug Connector: 1 removable 2-Pin terminal block | |
| Power over Ethernet | |
| PoE Standard: | IEEE 802.3af/at Power over Ethernet | 
| Number of devices that can be powered: |  			 1 (DC19V) (Vary on device’s power requirement; cannot be over 20 watts.)  |  		
Overview
 The data transmission, up to Gigabit speeds, with power output voltages of 19VDC, run simultaneously up to the Ethernet limit of 100 meters. Simple settings of the LNK-INS301-19V, make it a plug and play device, requiring no tools or software configuration, and provides ease of use, with flexible installation and high reliability.
 

 Ordering Information
| Model | Description | 
| LNK-INS301-19V | Industrial IEEE802.3at Gigabit PoE Splitter Output Voltage 19VDC, maximum output of 20W at 19VDC, Support DIN-Rail mounting and Wall mounting installation, -40 to 80°C operating temperature | 
| Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is included. |