MOOG D634-341C Proportional Valve
Core Specifications
Flow & Pressure
| Rated Flow |
60/100 L/min (ΔP=35 bar, single throttling side) |
| Maximum Flow |
185 L/min |
| Maximum Operating Pressure |
P/A/B port: 350 bar (5000 psi); T port: 50 bar; Y drain port: 350 bar |
Performance Characteristics
| Response Time |
Valve spool 0-100% fully open ≤20 ms |
| Frequency Response |
40-60 Hz (-3dB) |
| Hysteresis |
< 0.2% |
| Resolution |
< 0.1% |
Electrical & Control
| Drive System |
Direct drive permanent magnet linear force motor |
| Feedback |
Built-in LVDT displacement sensor, valve spool position closed loop |
| Control Signal |
±10V / 4-20mA (optional) |
| Power Supply |
24 VDC (built-in electronics) |
| Protection |
Reverse polarity, overvoltage, overcurrent protection |
Installation & Physical
| Installation Standard |
ISO 4401-05-05-0-94 (NG10) |
| Valve Port Diameter |
11.5 mm |
| Weight |
6.3 kg (13.9 lb) |
| Seal Material |
Standard FPM (fluororubber), NBR optional |
| Media Compatibility |
Mineral oil (DIN 51524) |
| Viscosity Range |
5-400 mm²/s (Recommended 15-100) |
Environmental Conditions
| Ambient Temperature |
-20℃ to +60℃ |
| Oil Temperature |
-20℃ to +80℃ |
| Cleanliness Requirement |
Recommended ISO 4406 < 15/12; Long service life < 14/11 |
Product Features
Direct-Acting DDV Design
No pilot stage, no pilot leakage, strong anti-contamination capability, dynamic response independent of oil supply pressure.
High-Precision Closed Loop
LVDT + built-in electronic amplifier provides low hysteresis, high repeatability, suitable for precision position/pressure/force control.
High Dynamics
Fast response and high frequency response, suitable for high dynamic systems.
Low Power Consumption
Extremely low current near zero position for energy saving operation.
Fail-Safe Operation
In case of power failure/signal loss, the valve core returns to spring neutral position, enhancing system safety.
Compact Structure
Single-stage, integrated electronics simplifies system design and installation.
Typical Applications
Injection Molding Machines
Die Casting Machines
Rubber Machinery
Material Testing Machines
High-Frequency Vibration Tables
Aviation Simulation
Flight Simulators
Metallurgical Equipment
Heavy-Duty Presses
Multi-Axis Synchronous Hydraulic Systems