AIRSUSTECH Style F-240-3 Cross S-240-3 Yokohama Air Spring Rubber 3 Convoluted

OEM Cross reference

YOKOHAMA S-240-3R

YOKOHAMA S 240 3R

YOKOHAMA S2403R

YOKOHAMA S-240-3

YOKOHAMA S 240 3

YOKOHAMA S240-3

Specifications and Detailed Technical Parameters: F-240-3

The related picture of F-240-3

Improvement of punch equipment

When the punching equipment is working, the vibration and noise are very large, which not only damages the health of the staff, but also has a bad impact on the surrounding environment. Air springs can solve these problems. Before the air spring can work, it needs to be inflated inside. After the inflation is completed, the punching equipment is basically suspended in the air, and only the air and the skin are connected to the ground.
In addition, the air spring is a soft material. When working, the vibration frequency from the upper end cover to the lower end cover can be reduced to 1HZ, which avoids the vibration wave from the machine tool to the ground, and then from the ground to the machine tool. A vicious circle where all vibrations are lost to the air spring's bladder.

Characteristics of air spring

1, reduce the installation height, compared with other springs, can reduce the installation height, effectively increase the stroke.

2, Elastic and soft spring parameters can be obtained. The load is large and elastic and soft, and the anti-vibration performance is superior.

3, the output of bearing capacity is variable, and the bearing capacity can be changed in a large range by changing the internal pressure.

4, the height can be controlled, such as with the height adjustment valve, for different loads can maintain a constant height.

5, excellent damping effect, such as with the auxiliary gas chamber and throttle valve, can obtain excellent damping effect, so as to reduce the resonance amplitude.

6, Easy to install, simple structure, easy to install and disassemble.