The GF063 Series Single Turn Cermet Trimmers offer a wide variety of models with excellent performance and high reliability due to a precious metal, multi-contact wiper design. Featuring a cross slot for automatic machine adjustment, these trimmers are sealed to withstand immersion cleaning processes. The large diameter shaft allows for the use of commercially available adjustment drivers. They are suitable for various applications requiring precise resistance adjustment.
| Series | Product Shape | Packaging | Nominal Resistance Range | Total Resistance Tolerance | End Resistance | Resistance Taper | Power Rating | Max. Input Voltage | Operating Temp. Range | Mechanical Angle | Shaft Torque | Weight |
| GF063 | P, W, U, P1 (Top adjustment) | T (Taping/Reel), T2 (Taping/Ammo pack), M (Magazine/Stick), Blank (Vinyl pack), K (With knob) | 102M | 20% (10%) | 1% or 1, whichever is greater | B (Linear) | 0.5W/70, 0W/125 | 250V DC or V=(WR)/ not exceeding power rating | -55 to +125 | 250 10 | 0.9819.6mNm (10200gfcm) | 0.41g max. (P1,P,W,U), 0.52g max. (X,X1,S,S1,V) |
| GF063 | X, X1, S, S1, V (Side adjustment) | T (Taping/Reel), T2 (Taping/Ammo pack), M (Magazine/Stick), Blank (Vinyl pack), K (With knob) | 102M | 20% (10%) | 1% or 1, whichever is greater | B (Linear) | 0.5W/70, 0W/125 | 250V DC or V=(WR)/ not exceeding power rating | -55 to +125 | 250 10 | 0.9819.6mNm (10200gfcm) | 0.41g max. (P1,P,W,U), 0.52g max. (X,X1,S,S1,V) |
| Test Item | Test Condition | Standard |
| Soldering heat | 350 3 sec. | N/A |
| Rotation life | 100 cycles | R/R1% |
| Load life | 70 0.5W 1000 hours | R/R(2+3%) |
| Thermal shock | -55, +125 (30 minutes) 5 cycles | R/R3%, S.S.2% |
| Vibration | 102kHz Amplitude 1.5 mm (196m/s) 12 hours | R/R1%, S.S.1% |
| Shock | 981m/s 6 msec. 6 directions for 3 times each | R/R1%, S.S.1% |
| Low temperature operation | -55, 0.5W 2 hours | R/R1%, S.S.1% |
| High temperature exposure | +125, 250 hours | R/R2%, S.S.2% |
| Moisture and load life | +40, 9095RH 0.5 W 500 hours | R/R3%, S.S.2% |
| Moisture resistance | -10+65 (9095RH) 0.5W 240 hours | R/R2% |
| Seal test | +85 hot water 1 minute | 3 bubbles max. |
| Solvent resistance | Trichloroethane, IPA etc. | Possible for washing |
Taping: 1,000 pcs./reel or ammo pack. Orders in multiples of 1,000 pcs. are requested. Each reel/pack is boxed.
Magazine: 70 pcs./stick. Orders in multiples of 70 pcs. are requested.
Vinyl Bag: Minimum packing is 50 pcs./bag. Orders in multiples of 50 pcs. are requested. All quantities of 50 pcs. or more are boxed.