Performance parameters
Мах. boom length - 13.5 m;
Concrete pipe line (steel, DN125 mm), outer diameter of the and fitting on pipes - 148 mm;
The High pressure flexible concrete hose with two and fitting (3000 mm) must be included in the delivery;
Support - outrigger (4 legs);
Remote control - wired remote control.
Specification:
Model | HGY14 | ||
Performance | Horizontal reach(m) | 13.5 | |
Rotation(°) | 360° | ||
Elevation angle(°) | 0~80° | ||
Slewing brake | Normally closed | ||
Working environment temperature | -20℃~40℃ | ||
Weight(T) | Without counterweight | 2.1 | |
With Counterweight | 3.5 | ||
Outrigger Span | 2321×2321 | ||
Control System | Power Supply | 380V/50HZ, 3Phase | |
Power(kW) | 4 | ||
Protection grade | IP54 | ||
Insulation class | F | ||
System Pressure(MPa) | 20 | ||
Control mode |
Cable/Radio remote | ||
Boom | Duct cleaning method |
Wash/Dry cleaning | |
Boom open way | Three R | ||
Inner diameter of delivery pipe(mm) | Φ125 | ||
End rubber hose(m) | 3 | ||
Length(mm) | 3700/4850/4950 | ||
Corner(°) | 80/180/195 |
The HGY concrete placing boom is a spreading equipment used in conjunction with concrete pumps for pouring concrete during construction, suitable for any concrete building such as buildings, bridges, roads, foundations, etc. The use of concrete placing boom can fully utilize the working efficiency of concrete pumps, improve pouring quality, and reduce labor intensity.