Industrial Oil Filter With Automated Self Cleaning Filter Housing
Introduction For Industrial Oil Filter With Automated Self Cleaning Filter Housing
Liquid enters the filter housing through the inlet and passes through the filter element from the inside out. Contaminants are trapped on the inner surface of the wedge wire screen. A gear motor drives the scraper to continuously remove these impurities. As the element rotates against the fixed scrapers, cleaning is performed without interrupting the flow. The impurities removed are collected at the bottom of the filter and can be automatically discharged at intervals through the drain port.
Technical Parameters For Industrial Oil Filter With Automated Self Cleaning Filter Housing
| Filter Model |
Filter Inner Dia. |
Filter Height |
Thickness |
Filter Area |
Filtration Precision |
| HT-D219 |
250mm |
1000 |
3 |
0.2 |
50microns |
| HT-D273 |
300mm |
1450mm |
4mm |
0.5 |
| HT-D325 |
350mm |
1600mm |
4mm |
0.6 |
| HT-D400 |
450mm |
1700mm |
6mm |
0.7 |
| HT-D450 |
500mm |
1750mm |
6mm |
0.9 |
| HT-D550 |
600mm |
1850mm |
6mm |
2.0 |
| HT-D800 |
850mm |
2000mm |
6mm |
2.5 |
Working Principle For Industrial Oil Filter With Automated Self Cleaning Filter Housing
1)Automatic Cleaning —Mode 1 (Timed Cycle)
Motor:Operates and stops according to a preset schedule.When running,the motor drives the shaft to rotate,allowing the scraper to remove impurities accumulated on the filter cartridge .After the set running time is reached,the motor stops working.After the preset stopping time is reached,the motor starts running again .This cycle continues automatically.
Drain Valve:Opens and closes according to preset schedule; The loop control is identical to the motor loop control.
2)Automatic Cleaning —Mode 2 (Differential Pressure Start)
The device is equipped with pressure sensors at both the inlet and outlet to monitor the inlet pressure and outlet pressure.When the pressure difference between the inlet and outlet reaches the preset value,the device automatically transitions from the circulation state of Mode 1 to this mode;the motor activates, and the discharge process begins immediately.
3)Manual Cleaning:
The operating status of the motor and drain valve is controlled entirely via manual switches by worker.
Feature For Industrial Oil Filter With Automated Self Cleaning Filter Housing
1. High filtration accuracy, the minimum accuracy can reach 20 microns.
2. No disposable consumables are produced, saving consumable costs and environmental protection treatment costs.
3. High degree of automation, no need for manual cleaning, dual control of pressure difference and time, to achieve full automation of cleaning
4. Closed filtration to prevent leakage of hazardous materials, which is conducive to safe and efficient production.
Application Industry For Industrial Oil Filter With Automated Self Cleaning Filter Housing
water treatment, paper making,petrochemical, sanitary, paint, ink,grease, food and beverage, etc.