I. Two-stage RO process:
Raw Water → Pressurized Pump → Multimedia Filter → Activated Carbon Filter → Water Softener → Precision Filter → Primary RO → pH Adjustment → Intermediate Tank → Secondary RO → Purified Water Tank → Pure Water Pump → UV Sterilizer → Microporous Filter → Water Point
II.Parameters
Item | Specification | ||||||
Model | HJ - PWGFH20T | ||||||
Flow rate | 0.25~200m³/h | ||||||
Electricity Supply | 380V | ||||||
Produced Water Quality | Conductivity < 1μs/cm | ||||||
Core Technology | two-stage Reverse Osmosis (RO) | ||||||
Key Components | RO Membrane Modules | ||||||
Operation Mode | Full Automatic (PLC-controlled) | ||||||
Warranty period | 2-Year |
III. Production overview
The circulating water in a floor heating system refers to water that is heated and then sent through pipes to the floor radiation area, where it circulates. Through heat exchange, the heat from the floor is transferred to the room, providing a comfortable heating environment.
Floor heating systems require low water hardness to reduce scale deposition, thereby improving thermal efficiency and system life. Through two-stage reverse osmosis technology, dissolved salts and minerals in the water can be further removed to ensure that the circulating water of the floor heating system is clean and low in hardness, avoiding system blockage or corrosion.
IV. Here is a guideline for you to get a proper quotation
Tell us the raw water/source of water(tap water, well water, or sea water, etc)
Provide water analysis report(TDS , conductivity, or resistivity, etc)
Required production capacity( 5m³/H, 50m³/H,or 500m³/H, etc)
What's the pure water used for( industrial,Food and Beverage,or agriculture, etc )