PVDF Membrane Microporous Pleated Filter Cartridge Microelectronics Filter 0.22um
General Description
The PVDF Pleated filter cartridge is constructed of imported natural hydrophobic Polyvinylenedifluoride (PVDF) membrane media and non-woven support materials. Adaptors are thermally welded with media without using any glue on it, so there is no possibilities to cause pollution.
Applications:
1. High purity gas in the electronics industry;
2. Clean gas for aseptic packaging;
3. Steam filtration;
4. Oxidizing liquid and gas sterilization filtration;
5. Petroleum industry;
Features
1. Natural hydrophobic product suitable for gas filtration;
2. The modified membrane is hydrophilic and suitable for liquid filtration;
3. Wide applicability, PH range 1-13;
4. With high temperature and oxidation resistance;
5. Small differential pressure, large flow and long service life;
6. Each filter is rinsed with high purity water before leaving the factory.
Dimensions
| Outer diameter | 2.7" (69mm) | 
| Length | 10", 20", 30", 40" | 
Material of Construction
| Model | Membrane Pleated Filter | 
| Filter Medium | PVDF | 
| Support/Drainage | Polypropylene | 
| Center core/Outer Cage/End Caps | Polypropylene | 
| Seals Material | NBR, Silicone, EPDM, Viton | 
Filter Performance
| Micron | 0.1um, 0.22um, 0.45um, 0.65um | 
| Length | 10", 20" | 
| Interception rate | 100%, 107CFΜ/cm² | 
| Max. operating temperature | 80℃ | 
| Max. operating differential pressure | 0.42Mpa at 25℃ | 
| 
			 Max. operating differential pressure (Reverse direction)  | 
			0.21Mpa at 25℃ | 
| Applicable PH | 1-14 |