Hydrophilic Pleated PVDF Membrane Filter Cartridge for Terminal Filtering
General Description
The PVDF Pleated filter cartridge is constructed of imported natural hydrophobic Polyvinylenedifluoride (PVDF) membrane media and non-woven support materials. Adaptors are thermally welded with media without using any glue on it, so there is no possibilities to cause pollution.
Applications:
Large-scale fermenter air
Intermediate product vessel venting
Autoclave vacuum break
Instrument air
Air and gas service lines
Features
* Natural hydrophobic product suitable for gas filtration;
* The modified membrane is hydrophilic and suitable for liquid filtration;
* Wide applicability, PH range 1-13;
* With high temperature and oxidation resistance;
* Small differential pressure, large flow and long service life;
* Each filter is rinsed with high purity water before leaving the factory.
Dimensions
| Outer diameter | 2.7" (69mm) |
| Length | 10", 20", 30", 40" |
Material of Construction
| Model | Membrane Pleated Filter |
| Filter Medium | PVDF |
| Support/Drainage | Polypropylene |
| Center core/Outer Cage/End Caps | Polypropylene |
| Seals Material | NBR, Silicone, EPDM, Viton |
Filter Performance
| Micron | 0.1um, 0.22um, 0.45um, 0.65um |
| Length | 10", 20" |
| Interception rate | 100%, 107CFΜ/cm² |
| Max. operating temperature | 80℃ |
| Max. operating differential pressure | 0.42Mpa at 25℃ |
|
Max. operating differential pressure (Reverse direction) |
0.21Mpa at 25℃ |
| Applicable PH | 1-14 |