IMPCO HPR3600 , High Pressure Single Stage Regulator , Compressed Natural Gas Application
Key Features
High pressure single stage regulator for compressed
natural gas with working inlet pressure up to 25MPa
is available with optional manifold reference
pressure barb for improved response. Engine
coolant barbs are now expanded to offer 3/8” or
5/8” in both straight and angled.
• Proven design with over 30 years of in service
history
• Optional MAP reference barb
• Certified to ECE R110 and ISO 15500
• Built in fuel filter
• 3/8” or 5/8” coolant barbs, straight or angled
| HPR 3600 |
| GENERAL INFORMATION | |
| APPLICATION | High pressure single stage regulator |
| DESIGN | Single stage regulator heated by coolant |
| FUEL TYPE | High Pressure Natural Gas (Validated with G20 and G25 CNG) |
| PERFORMANCE | |
| WORKING PRESSURE | 25 MPa (3,600 psig) |
| BURST PRESSURE | > 65 Mpa |
| MINIMUM INLET PRESSURE | 1.17 Mpa |
| TYPICAL OUTLET PRESSURE | 1.1 MPa (factory options available) |
| OUTLET FLOW RATE | Up to 20 g/s |
| WORKING TEMPERATURE | -40°C to 120°C (-40°F to 248°F) |
| PRESSURE RELIEF VALVE | 2.76 Mpa |
| FILTER (REPLACEABLE) | 40 μm, 99% efficiency |
| LEAKAGE | <0.25 standard cc/min Helium, external (<0.25 standard cc/min Helium, internal) |
| HEATER CIRCUIT | |
| MEDIA | Water / Ethylene Glycol Mixture |
| FLOW DIRECTION | Bi directional |
| APPROVALS | |
| CERTIFICATIONS | ECE R110, ISO 15500-2012 |
