Return on investment:
Compared to traditional hot air drying, the equipment recycling cycle has been shortened to 18 months
Energy saving benefits: Annual electricity savings of 300000 to 500000 yuan (based on 1000L models)
Product yield improvement: reduce waste loss by 5-8 percentage points
Floor Area: Save 40% (Vertical Multi story Structure Design)
Economic parameters:
Equipment utilization rate: ≥ 92% (intelligent preventive maintenance)
Consumable cost: filter cartridge life extended to 6000 hours
Compatibility: Adapt to the transformation of existing production lines (interface standardization)
Key trades:
Cost sensitive areas such as pesticide raw material drying (solvent residue<10ppm), graphene slurry processing (continuous production), and processing of Chinese medicinal materials in production areas (moisture content reduced from 25% to 8%).
Specification
1 Round chamber
| mm
| Ultimate vacuum
|
Leakage rate
| Operating temp. | Temp. accuracy | Control mode |
| Ф2200×3000 | ≤50Pa (unload) | ≤100Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |
| Ф2400×3000 |
≤50Pa (unload) | ≤100Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |
| Ф2600×3000 |
≤50Pa (unload) | ≤100Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |
| Ф2800×3000 | ≤50Pa (unload) | ≤100Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |
| Ф3000×3500 | ≤50Pa (unload) | ≤100Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |
| Ф3200×3500 | ≤50Pa (unload) | ≤100Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |
| Ф3200×4000 | ≤50Pa (unload) | ≤100Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |
| Ф3600×8000 | ≤50Pa (unload) | ≤100Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |
| Ф4200×8000 | ≤50Pa (unload) | ≤100Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |
2 , Rectangular chamber
|
Dimension mm |
Ultimate vacuum
|
Leakage rate
| Operating temp. | Temp. accuracy |
Control mode
|
| 4000×2500×2500 | ≤50Pa (unload) | ≤500Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |
| 4000×3000×3000 |
≤50Pa (unload) | ≤500Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |
| 5000×3000×3000 | ≤10Pa ≤10Pa (unload) | ≤500Pa.L/S | 115±5℃ | ±5℃ |
Auto control by HMI |
| 5000×3000×3500 | ≤10Pa ≤10Pa (unload) | ≤500Pa.L/S | 115±5℃ | ±5℃ | Auto control by HMI |