Replace Molex 672983090 | USB Type AB 6-Pin Nickel-Plated Female Port Connector, Solder Jack Adapter
Product Highlights
✅ IPX7 / IPX8 Waterproof Option | Sealed variant for outdoor & wet-enclosure designs
✅ Stable Power Delivery | Supports 100W PD / 240W PD high-power charging, consistent under continuous load
✅ Flexible PCB Termination | SMT / THR Through-Hole Reflow / Dual-Row SMT available
✅ Anti Board Peeling Reinforcement | Reinforced shell & anchor pins to solve common pain point: pin lifting, cracking & de-soldering after repeated mating cycles
✅ Direct Reel Packaging | Ready for auto pick-and-place SMT line
Technical Specifications Table
| Item |
Parameter |
| Electrical |
Rated Voltage: 30V DC
Rated Current: 5A Max
Contact Resistance: ≤20mΩ (initial) / ≤50mΩ after durability
Insulation Resistance: ≥1000MΩ
Withstand Voltage: 1500V AC, 1min no breakdown
Protocol: USB 2.0 / USB3.0 optional |
| Mechanical |
Mating Cycles: ≥1000 times
Insertion Force: 5–35N
Withdrawal Force: 3–20N
Mount: SMT / THR / Dual-Row SMT
Polarized & anti-misplug design |
| Material & Plating |
Housing: High Temp Nylon, UL94V-0
Contact: Phosphor Bronze
Plating: Nickel plated base; selective gold flash on contact area
Shell: Copper alloy, nickel plating |
| Environmental |
Operating Temp: -40°C ~ +85°C
Storage Temp: -45°C ~ +105°C
Waterproof: Standard = Non-sealed; Optional IPX7 / IPX8 |
| Soldering Guide |
SMT: Reflow 260°C max, 10s
THR: Wave soldering 260°C max, 5s
Do not apply excessive mechanical stress immediately after soldering |
Cross Reference / Compatible Replacement
Direct drop-in replacement for Molex 672983090. Pinout, footprint, PCB alignment & mounting bosses match original drawing. Alternative cross-reference: compatible with equivalent JST / TE USB AB 6P female jack footprints for BOM migration.
Benefit: No PCB redesign required; fast second source for supply risk mitigation.



Product Features
- Nickel-plated shell for shielding & anti-corrosion
- Reinforced anchor pins to resist PCB peeling from frequent plug/unplug
- Multiple termination versions to match your PCB stack-up
- High-temperature housing compatible with standard SMT reflow
- Polarized cavity to prevent reverse mating damage
- Waterproof sealed version optional for handheld, outdoor, marine equipment
Product Advantage