93%+ Granulation Rate: Unique circular arc disc design, uniform particles, less material return, and a 30% increase in production efficiency!
Thick Carbon Steel Body: Corrosion-resistant, wear-resistant, with a lifespan of over 8 years!
380V Industrial Power Supply: Compatible with mainstream global voltages, supporting continuous 24-hour full load operation.
Intelligent Control System: The three parameters of tilt angle, speed, and water spray volume can be adjusted to meet different material requirements.
The following components are standard disc pelletizer mechanisms:
| Component | Description |
|---|---|
| Base | The base is fabricated using structural members and heavy welded plates. It provides a solid foundational structure for pelletizers. |
| Disc | The disc, also referred to as the pan, is constructed of heavy-duty carbon steel plates. The plates are welded and reinforced to strengthen the overall structure. Included in the disc system is a hand-wheel operated jacking screw that easily adjusts the disc's horizontal angle. |
| Drive Unit | The drive unit is comprised of automated mechanisms such as the motor, parallel or concentric shaft reducer, and V-belt drive. Both the motor and the reducer are mounted on a bracket behind the disc. The disc is then mounted to the reducer's output shaft. |
| Plow / Scraper | Plows and scrapers are independently mounted vane-type components that control the material layer as it tumbles over the surface of the disc. The scrapers of larger diameter discs are covered with a ceramic, wear resistant coating/facing that protects the scraper from abrasive materials. |
| Plow Support | The plow support is constructed of heavy, welded, structural members. It is fabricated to provide rigidity to the disc support system and permit quick adjustments to the disc angle without requiring a separate plow adjustment. |