MachineU > China Products > Electrical Equipment & Supplies
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component
Specifications
Brand Name :
Sinuo
Model Number :
SN4411
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Payment Terms :
T/T
Supply Ability :
10 Sets Per Month
Delivery Time :
30 days
Packaging Details :
Export packing
Chamber internal height :
>400mm
Chamber internal diameter :
350mm diameter
IP code test range :
IPX8 test
Maximum pressing force :
4.0 bar
Sample size :
W170mm*D90mm*H30mm
Tank material :
SUS304 stainless steel
Control :
PLC control
Drive :
External air compressor drive
Description


High Pressure Water Tank IPX8 Immersion Test Equipment IEC 60529


Complied Standards & Clauses

Conforms to IEC 60529:2013 IPX8 etc.

Product Overview

This test is applicable to electrical and electronic products that are waterproof and may be subjected to immersion in water during transportation or use. The test specimens are immersed in a water tank to a specified depth and subjected to a specified pressure. After the test, the extent of water ingress and any changes in performance are examined.

Technical Parameters

Inner diameter of the tank 350mm
Height inside the tank 590mm
External dimensions of the tank Approximately 360mm in outer diameter * 900mm in height
Stainless steel tank thickness 5mm
Time control 1～99999S
Pressure management methods Manual adjustment
Pressure display method The touchscreen display allows for pressure setting and pressure display via the touchscreen.
Pressure gauge adjustment range Atmospheric pressure to 500 kPa (1–50m water depth)
Maximum limit pressure The settings are configurable at the factory. It features pressure switch protection, typically set to automatically vent when the pressure reaches 550 KPa.
Pressure protection Spring-loaded safety relief valve; Program control: If the pressure exceeds the upper limit, the system immediately shuts down and releases the pressure.
Pressure release method Automatic pressure release after the test is completed.
Lid opening method Manual opening and closing
Pressurization system External air supply (to be provided by the user, ≥ 5 kg)
Control system Touch screen control
Container material 304 stainless steel
Features This water immersion test device is equipped with a pressure protection and explosion-proof device and a drainage and pressure relief device.
Safety and protection system Alarm sound notification
Equipment usage conditions
Drain pipe diameter Please plan the equipment placement carefully, and install the circuit breaker nearby in advance. The drain pipe should be installed below the circuit breaker, and the drain pipe (1/2 inch pipe) should be installed close to the ground.
Power requirements

AC 220-240V, 50Hz±10%; Power: 1KW;

Install a separate 16A circuit breaker; the circuit breaker must have terminal blocks, and the power cord must be ≥2.5㎡
Environmental conditions

Temperature: 15℃ to 35℃;

Relative humidity: 25% RH to 75% RH;

Atmospheric pressure: 86 kPa to 106 kPa
The pressure gauge reading corresponds to the water depth

0.1MPa=1Kg/cm²=10M；

0.2MPa=2Kg/cm²=20M；

0.3MPa=3Kg/cm²=30M；

0.4MPa=4Kg/cm²=40M；

Details

IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive ComponentIEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component

Send your message to this supplier
Send Now

IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component

Ask Latest Price
Watch Video
Product Detail
Brand Name :
Sinuo
Model Number :
SN4411
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Payment Terms :
T/T
Contact Supplier
video
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component
IEC 60529 IPX8 Test Chamber Immersion Test Equipment for Automotive Component

Sinuo Testing Equipment Co. , Limited

Verified Supplier
5 Years
guangdong, guangzhou
Since 2019
Business Type :
Manufacturer
Main Products :
Electric Vehicle Testing Equipment, EVSE Testing Equipment, EV Connector Testing Equipment
Employee Number :
<100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Water Ingress Testing Equipment
MachineU China Products Electrical Equipment & Supplies
Contact Supplier
Submit Requirement