MachineU > China Products > Electrical Equipment & Supplies > Electrical Supplies > Plugs & Sockets
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
Specifications
Model Number :
SNQC1007
Torque Weights :
0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m
Payment Terms :
T/T
Price :
Customized
Torque Time :
0-99H59M59S, can be preset, default 1min
Supply Ability :
10 sets per month
Certification :
Calibration Certificate (Cost Additional)
Torque Arm :
R100mm(Ф200mm)
MOQ :
1
Delivery Time :
30 Days
Pull Cycles :
1-9999 cycles, can be preset, default 100 cycles
Place of Origin :
China
Pull Frequency :
1cycle/s
Packaging Details :
Plywood Case
Brand Name :
Sinuo
Pull Weights :
160N, 200N, 240N, 250N,500N, 600N
Description
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
Product information:

The EV Plug Pull Force and Torque Tester is designed to test the mechanical strength of electric vehicle charging plugs, socket-outlets, and connectors. It verifies whether EV charging interfaces can withstand specified pulling force and torque requirements during connection and usage.

This tester is widely used by EV charging equipment manufacturers, automotive laboratories, and connector testing organizations for reliability and safety evaluation.

The equipment is designed according to IEC 61851-1:2017 Clause 11.6, IEC 62196-1:2020 Clause 25.3 Figure 17 & Table 11, and IEC 60309-1:2012 Clause 23.3.

Test Principle

The pull force test is achieved by a single-phase speed-regulating motor driving an eccentric mechanism. The adjustable motor speed ensures accurate force application time and stable testing cycles.

The torque test is performed by a air cylinder releasing the torque weight, applying the required rotational load to evaluate the mechanical strength of the connector.

IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
Technical parameters:
Operation Method Button operation
Drive Mode Motor and cylinder
Pull Force Weights One set of pull force weights
Can achieve 160N, 200N, 240N, 250N,500N, 600N
Torque Weights One set of torque weights
Can achieve 0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m
Torque Arm R100mm(Ф200mm)
Pull Frequency 1cycle/s
Pull Cycles 1-9999 cycles, can be preset, default 100 cycles
Torque Applied Time 0-99H59M59S, can be preset, default 1min
Fixture One set of universal fixtures
Equipment Dimensions & Weight W1300*D800*H1300mm, the whole machine is about 150Kg
Power Supply Single phase AC220V±10%, 50Hz, 10A
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
Testing Procedure
  1. Install the EV plug or connector onto the dedicated fixture.
  2. Set the required pulling force and torque values according to the applicable standard.
  3. Start the automatic test process.
  4. The equipment applies pulling force through the eccentric drive mechanism.
  5. The torque system releases the calibrated weight to apply rotational force.
  6. Evaluate whether the connector maintains mechanical integrity after testing.
Product Advantages
  • Designed specifically for EV charging connector mechanical testing
  • Supports IEC 61851-1 and IEC 62196-1 compliance verification
  • Suitable for automotive laboratories and EV component manufacturers
  • Stable force application with accurate test control
  • Helps improve charging connector safety and reliability
Send your message to this supplier
Send Now

IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing

Ask Latest Price
Watch Video
Product Detail
Model Number :
SNQC1007
Torque Weights :
0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m
Payment Terms :
T/T
Price :
Customized
Torque Time :
0-99H59M59S, can be preset, default 1min
Supply Ability :
10 sets per month
Contact Supplier
video
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing
IEC 62196-1 EV Plug Pull Force and Torque Tester for Charging Connector Testing

Sinuo Testing Equipment Co. , Limited

Verified Supplier
5 Years
guangdong, guangzhou
Since 2019
Business Type :
Manufacturer
Main Products :
Electric Vehicle Testing Equipment, EVSE Testing Equipment, EV Connector Testing Equipment
Employee Number :
<100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Electric Vehicle Testing Equipment
MachineU China Products Electrical Equipment & Supplies Electrical Supplies Plugs & Sockets
Contact Supplier
Submit Requirement