Wallbox 32A 7KW IEC 62196 type 2 EV charging stations level 2 ev charger

Product Description:

Electric is a specialist in EV charging station installations around China in multiple different scenarios.

Our products possess the top-graded materials to withstand extreme conditions, namely being temperature-resistant, water-proof, and dust-proof, which comply with the IP54 certification.

We can install wall or floor-mounted EV Chargers, which are applied in both indoor and outdoor settings, such as garages at home or villa, carports, on-street parking and driveways.

Those charging stations can interconnect with payment systems and back-office support through the OCPP platform for residential management and commercial use.

Electric incorporates solar PV systems or energy storage systems into our products. Meanwhile, all EV chargers are qualified with level II charging speed. Therefore, people can efficiently charge their electric vehicles by using solar energy.
Product Paramenters

Specification:

The Operation Process of Charging
1. Insert the EV charger (connect the charging plug)
2. Start charging (Method 1: Plug the charger and start charging; Method 2: Use the designated charging card to swipe. The green
light flashes indicating normal charging.) Swipe the card again to end charging.

3. Method 1: Pull out the charger to end the charging; Method 2: Swipe the card again to end the charging
4. Put the EV charger back to its place

Precautions
1. For the first installation, attention should be paid to the power cable according to IN-L (fire), IN-N (zero), PE (ground) one
by one, and the fire wire and zero wire cannot be reversed.
2. PE (ground wire) needs to be grounded reliably;
3. Make sure the emergency stop switch is activated after power on；
4. Before charging, make sure that the tip of the EV charger is free from stains and water;
5. It is prohibited to place the AC charging stations (piles) inside the car when charging.