MachineU > China Products > Machinery > Plastic & Rubber Processing Machinery > Plastic Auxiliary Equipment > Mould Temperature Controller
Sand Temperature Regulator with Manual Shut Off Plates and Circulating Water Systems for Production Rate ≥20~40T/h
Sand Temperature Regulator with Manual Shut Off Plates and Circulating Water Systems for Production Rate ≥20~40T/h
Specifications
Brand Name :
TOVAC
Model Number :
40t/h
Place of Origin :
Shandong, China
MOQ :
1 unit/set
Price :
1000USD-10000USD
Payment Terms :
T/T
Supply Ability :
1000 units before the year
Delivery Time :
10-20 working days
Applicablematerials :
Sand, gravel, stone, ore
Weight :
5-20 tons
Aftersalesservice :
24/7 technical support and spare parts supply
Environmentalimpact :
Low Emission, Eco-friendly
Warrantyperiod :
12 months
Function :
Vibrate the casting sand to compaction
Operatingtemperature :
-10°C to 50°C
Capacity :
50-500 tons per hour
Processingstages :
Screening, washing, dewatering, grading
Installationtype :
Stationary or mobile
Description

1. Product Overview
The sand temperature regulator uses circulating water to cool or heat the sand material by ensuring full contact between the sand particles and the pipes inside the cooler, allowing for heat exchange to complete the cooling or heating task.

2. Components
The sand temperature regulator consists of several cooling sections, equipped with flow regulation plates and manual shut-off plates. Each cooling section contains multiple drainage pipes. The sand, after being air-classified, flows evenly through these cooling pipes, allowing it to cool down. The flow regulation plate consists of two layers of perforated plates, and the sand flow is controlled by adjusting the misalignment of the plates. The entire system uses automated control and is equipped with temperature sensors. After cooling, the sand temperature is fed back to the control center via the sensors for intermittent discharge.

3. Parameters

Production rate: ≥20~40T/h

Circulating water volume: 40~100 m³/h

Water pressure: 0.2-0.4Mpa

Cooling steel pipe: φ25×3

4. Main Functions and Advantages

Main Functions:

Reduce sand temperature to ensure molding quality

Stabilize production rhythm and improve efficiency

Pre-mix sand and homogenize temperature

Core Advantages:

Improve casting quality

Increase production efficiency

Heat energy recovery and environmental protection

Controllable automation

Stable and reliable operation

Send your message to this supplier
Send Now

Sand Temperature Regulator with Manual Shut Off Plates and Circulating Water Systems for Production Rate ≥20~40T/h

Ask Latest Price
Product Detail
Brand Name :
TOVAC
Model Number :
40t/h
Place of Origin :
Shandong, China
MOQ :
1 unit/set
Price :
1000USD-10000USD
Payment Terms :
T/T
Contact Supplier
Sand Temperature Regulator with Manual Shut Off Plates and Circulating Water Systems for Production Rate ≥20~40T/h

Zibo Tongpu Vacuum Equipment Co., Ltd.

Verified Supplier
1 Years
shandong, zibo
Since 2005
Business Type :
Manufacturer
Main Products :
EPC Casting Production Line, Lost Foam Casting Equipment, Vacuum Process Production Line
Total Annual :
8,000,000-10,000,000
Employee Number :
100~200
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Sand Processing Equipment
MachineU China Products Machinery Plastic & Rubber Processing Machinery Plastic Auxiliary Equipment Mould Temperature Controller
Contact Supplier
Submit Requirement