AA10VSO45DFR1/31R-PPA12N00 A10VSO71DRG/31R-PPA12N00 L10VSO100DFLR/31R-PPA12N00 HA10VSO45DR/31R-PPA12N00 L10VSO45DFR1/31R-PPA12N00 Rexroth variable displacement piston pump
hydraulic system | high pressure | electric | cast iron | construction machinery |
hydraulic oil | variable | vertical | Rexroth | plunger pump | hydraulic | |
Edge standing | wooden box | nationwide | pipeline pump | Edge standing | plunger pump | |
Used in the mechanical industry | | | | |

HA10VS071DR/31L-PKC62N00 |
A10VO71DR/31L-PKC62N00 |
A10VO100EP1ED/53R-VRC12K07 |
A10VO100EP1DS/53R-VSC12K68 |
A10VSO140DFR1/31R-PPB12N00 |
A10V071DR/31R-PPA12N00 |
A10VSO28DFR/31R-PSA12N00 |
A10VO100EP1DS/53R-VSD12K07 |
A10VS0100DR/31R-PPA12N00 |
HA10VSO71DFR/31L-PKC62N00 |
A10VO45DFR1/31R-PSC62K04 |
A10VO100EP2D/53R-VRC12K15 |
A10VSO18DR/31L-VSC62NOO |
A10VSO140DFLR1/31R-PPB12KO1 |
A10VO28DFR1/31R-PSC61N00 |
HA10VS0100DR/31R-VSC62NOO |
A10V045DR/31R-VPA12NOO |
|
FAQ;
Overheating is usually caused by:
- Mechanical friction: Increased friction between moving parts such as bearings, pistons, and the cylinder block (often due to wear, lack of lubrication, or misalignment).
- Fluid friction: Excessive resistance in the oil flow path (e.g., narrow hoses, blocked valves) or turbulent flow inside the pump.
- Excessive system pressure: A clogged oil filter can cause a pressure buildup in the system, forcing the pump to work under overload and generating excess heat.
This issue is commonly caused by:
- Malfunction of the displacement controller: The controller may be misaligned, loose, or damaged. In this case, re-calibrate the controller to the neutral position, tighten loose components, or replace the faulty controller.
- Reduced angle retention force or wear: Insufficient force to keep the swashplate at zero tilt, or excessive wear on the swashplate’s trunnion (pivot point), causing the swashplate to maintain a small tilt angle even in neutral.