Power Entry Module Filter Fast-on Terminal Power Filter Filter 10A YB11C4

Power Entry Module Filter:

Power entry model filters with an IEC inlet, a mains filter with dual-fuse holder and a 2-pole rocker switch. Power entry modules combine IEC inlet, RFI filtering with good attenuation with a double pole switch in a compact metal housing that is fit for front panel mounting.Typical applications in electrical and electronic equipment, game, player, household equipment, medical equipment, testing and measuring equipment.

Features Of YB11C4-10A-Q EMI Filter:

--Power entry model filters with an IEC inlet, a mains filter with dual-fuse holder and a 2-pole rocker switch.
--The rated current can be offered up to 10 amps.

--Custom-specific versions are available on request.

Technical Specification:

1. Rated Voltage: 115/250VAC
2. Rated Currents: 1A,3A,6A,10A
3. Operating Frequency: 50/60Hz

4. Nominal Center Frequency 10K-30MHZ

5. Package Type Surface Mount
6. Hipot Rating(Line-to-Line): 1450VDC
7. Hipot Rating(Line-to-Ground): 2250VDC
8. Operating Temperature: -25 ~ +85°C
9. Safety Compliance: CE; 1 to 10A

10. Maximum Leakage Current:115VAC/50HZ 0.3uA Max

Typical Applications:

1. Portable electrical and electronic equipment;

2. Medical equipment;

3. Test and measurement equipment;

4. Small and medium-sized machines and household equipment

5. Single-phase power supply,switch-mode power supply

Filter Selection Table:

YB11C4-10A-Q Picture:

Naming Rule:

Medical Type Tabulates:

*Q: Fast-on 6.35x0.8mm S: solder 4.0x0.8mm W: UL1015 18awg

Electrical Schematic:

Fig.2

Mechanical Dimension(Unit: mm)

Insertion loss table(In 50ohm system according IEC/CISPR No.17)

Common mode -------- differential mode

1A 3A

6A 8A

10A