DBETE-52/200G24K31F1M Rexroth Proportional Control Valve
DBETE-52/200G24K31F1M Rexroth proportional control valve, German made overflow valve, imported with original packaging
Technical Specifiions
| Parameter |
Value / Description |
| Product Model |
DBETE-52/200G24K31F1M |
| Nominal Pressure Rating |
200 bar (maximum operating pressure at port P) |
| Supply Voltage |
24 V DC (±10%, 21 to 35 V DC permissible range) |
| Electrical Connection |
6-pin plug + PE, compliant with DIN 43563 standard |
| Control Signal Input |
0 to 10 V analog signal (F1 type) |
| Protection Class |
IP65 (dust-tight and protected against water jets) |
| Ambient Temperature Range |
-20 °C to +50 °C (operating temperature) |
| Hydraulic Fluid Compatibility |
Mineral-based hydraulic oils (HL, HLP per DIN 51524), viscosity range: 10-800 mm²/s |
| Seal Material |
NBR (nitrile rubber, indied by 'M' suffix) |
| Maximum Flow Rate |
2 L/min (at nominal pressure) |
| Maximum Operating Pressure |
420 bar (peak pressure) |
| Response Time |
<70 ms (typical for full signal change) |
| Hysteresis |
≤1% (typical) |
Related Product Models
DBETE-6X/350YG24K31F1V
0811402036 DBETX-1X/50G24-8NZ4M
0811402018 DBETX-1X/80G24-8NZ4M
0811402017 DBETX-1X/180G24-8NZ4M
0811402019 DBETX-1X/250G24-8NZ4M
0811402016 DBETX-1X/315G24-8NZ4M
0811402034 DBETX-1X/50G24-25NZ4M
0811402030 DBETX-1X/80G24 25NZ4M
0811402031 DBETX-1X/180G24-25NZ4M
0811402035 DBETX-1X/250G24-25NZ4M
0811402032 DBETX-1X/315G24-25Z4M
0811402013 DBETBX-1X/28G24-37Z4M
0811402007 DBETBX-1X/80G24-37Z4M2
0811402003 DBETBX-1X/180G24-37Z4M
0811402001 DBETBX-1X/250G24-37Z4M2
0811402004 DBETBX-1X/315G24-37Z4M
Frequently Asked Questions
What is the nominal pressure rating and maximum flow rate?
The nominal pressure rating is 200 bar, and the maximum flow rate is 2 L/min at this pressure. For optimal performance and longevity, it's recommended to operate within these specified limits.
What are the electrical specifiions and control signal requirements?
The valve operates on a 24 V DC power supply (permissible range: 21-35 V DC). The control input accepts an analog 0 to 10 V signal. Electrical connection is via a 6-pin plug with PE, compliant with DIN 43563 standard.
What is the protection class and operating temperature range?
The valve has an IP65 protection class, making it dust-tight and protected against water jets. The ambient temperature range for operation is -20 °C to +50°C.
What hydraulic fluids and seal materials are compatible with this valve?
This model is compatible with mineral-based hydraulic oils (HL, HLP per DIN 51524 standards), with a viscosity range of 10-800 mm²/s. The seal material is NBR (nitrile rubber), indied by the 'M' suffix in the model number.
What is the typical response time and hysteresis performance?
The typical response time for a full signal change is less than 70 ms. The hysteresis is typically ≤ 1%, ensuring precise pressure control with minimal deviation between increasing and decreasing pressure cycles.