MachineU > China Products > Electrical Equipment & Supplies > Industrial Controls > Other Electrical Equipment
Dynisco PT4624-3.5M-6/18-SIL2 Melt Pressure Transmitter 4-20mA
Dynisco PT4624-3.5M-6/18-SIL2 Melt Pressure Transmitter 4-20mA
Specifications
MOQ :
1 unit
Packaging Details :
Anti-static Bag + Carton Box + Foam Protection
Accuracy :
±0.25% Full Scale
Model Number :
PT4624-3.5M-6/18-SIL2
Mountingtype :
Flush or Flush with diaphragm
Supply Ability :
10 Units per Month
Type :
Pressure Transducer
Responsetime :
Less than 1 ms
Price :
USD 1000 - 1500 / Unit
Application :
Plastic extrusion, injection molding
Delivery Time :
7-14 Days
Pressuretype :
Gauge or Absolute
Brand Name :
Dynisco
Electricalconnection :
Integral Cable or Connector
Certification :
CE
Productname :
Dynisco Melt Pressure Transducer
Place of Origin :
USA
Description

Product Overview

The Dynisco PT4624-3.5M-6/18-SIL2 is a lower-range two-wire melt-pressure transmitter with a nominal pressure range of 0 to 3,500 psi and a 4-20 mA output. It is intended for processes where a lower full-scale range can provide more useful pressure resolution than 5,000 or 10,000 psi versions.

The device uses a rigid sensing stem and flexible capillary to separate the electronics housing from the high-temperature process area. The SIL2 suffix identifies a safety-oriented configuration, subject to validation within the complete control and safety system.

Main Product Information

Complete ModelPT4624-3.5M-6/18-SIL2
Pressure Range0 to 3,500 psi
Signal OutputTwo-wire 4-20 mA
Process Thread1/2-20 UNF
Stem ArrangementRigid stem with flexible capillary
Safety ConfigurationSIL2 device configuration
Maximum Diaphragm TemperatureUp to 400 degrees C

Lower-Range Application Notes

A lower pressure range can improve control resolution when the process normally operates below 3,500 psi. The selection must still provide adequate margin for startup peaks, blocked-screen conditions and process disturbances. The model should not replace a higher-range transmitter without confirming actual maximum pressure.

Typical Applications

  • Film and fiber extrusion
  • Lower-pressure polymer melt systems
  • Laboratory or pilot extrusion equipment
  • PLC-based process-pressure monitoring
  • Machine-protection and alarm circuits

Replacement and Safety Checklist

Confirm maximum operating pressure, transient peaks, 4-20 mA scaling, loop supply, load resistance, mechanical dimensions, connector pinout and process thread. Review the applicable SIL documentation and proof-test requirements for safety-related use.

Inquiry and Supply Notes

Provide the complete nameplate, process-pressure range, connected PLC or controller and safety-document requirements before ordering.

Send your message to this supplier
Send Now

Dynisco PT4624-3.5M-6/18-SIL2 Melt Pressure Transmitter 4-20mA

Ask Latest Price
Product Detail
MOQ :
1 unit
Packaging Details :
Anti-static Bag + Carton Box + Foam Protection
Accuracy :
±0.25% Full Scale
Model Number :
PT4624-3.5M-6/18-SIL2
Mountingtype :
Flush or Flush with diaphragm
Supply Ability :
10 Units per Month
Contact Supplier
Dynisco PT4624-3.5M-6/18-SIL2 Melt Pressure Transmitter 4-20mA

Dengfeng (XinXing) Trading Co., Limited

Site Member
1 Years
guangdong
Since 2024
Business Type :
Distributor/Wholesaler, Agent, Exporter, Trading Company, Seller
Main Products :
Rexroth PLC & Controllers, Mitsubishi PLC, Rexroth I/O Module
Total Annual :
1000000-1500000
Employee Number :
10~25
Certification Level :
Site Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Dynisco Melt Pressure Transmitters
MachineU China Products Electrical Equipment & Supplies Industrial Controls Other Electrical Equipment
Contact Supplier
Submit Requirement