Product Overview

The Dynisco TPT463E-15M-6/18 is a high-range combined melt-pressure and temperature model with a nominal full-scale pressure of 15,000 psi. It provides a 3.33 mV/V pressure output and a removable Type J thermocouple for applications requiring two process measurements at one mounting point.

Its rigid-stem and flexible-capillary arrangement is intended for high-temperature polymer machinery where the electrical housing must be positioned away from the process connection. The high pressure range makes exact confirmation particularly important because replacing it with a lower-range model can result in overload or incorrect control-system scaling.

Main Product Information

High-Pressure Application Considerations

The connected indicator, PLC input or pressure controller must be scaled for the 15,000 psi range. Mechanical mounting torque, mounting-hole condition, diaphragm clearance and process-pressure peaks should be reviewed before installation. A damaged or incorrectly machined mounting hole can affect the diaphragm and measurement performance.

Typical Applications

• High-pressure polymer extrusion
• Melt-pump inlet and outlet monitoring
• Screen changers and filtration systems
• Engineering-plastics compounding
• High-pressure die and downstream-process measurement

Replacement Checklist

Verify the 15M range, full model, stem and capillary lengths, J-type temperature input, process thread, connector, bridge excitation, controller scaling and allowable process temperature. Replacement suitability must be based on the complete configuration rather than visual similarity.

Inquiry and Supply Notes

Provide the original nameplate, equipment model, operating pressure and controller information. Configuration and current supply status should be confirmed before an order is placed.