Product Overview

The Schneider BMXAMI0810 is an eight-channel isolated high-level analog input module for the Modicon X80 automation platform. It combines high channel density with an isolated input architecture for industrial measurement and process-control applications.

The module supports 0–20 mA, 4–20 mA and positive or negative 10 V input ranges. It is suitable for systems where multiple analog transmitters must be connected while maintaining greater separation between measurement circuits.

The BMXAMI0810 must be configured in the PLC hardware project using the correct channel ranges, scaling and diagnostic parameters.

Main Features

• Exact commercial reference: BMXAMI0810
• Modicon X80 analog input module
• Eight analog input channels
• Isolated high-level input architecture
• Supports 0–20 mA signals
• Supports 4–20 mA signals
• Supports positive or negative 10 V signals
• Suitable for process and instrumentation systems
• Configured through EcoStruxure Control Expert
• Firmware can be managed according to the rack and slot configuration
• Exact isolation, scaling and diagnostics require project verification

Technical Specifications

Compatible System and Applications

The BMXAMI0810 is suitable for water treatment, chemical processing, energy systems, industrial machinery and process skids requiring multiple isolated current or voltage measurements.

Typical field devices include pressure transmitters, flowmeters, level transmitters and signal conditioners.

Isolation does not remove the need for correct grounding, shielding and cable routing. Installation must follow the field-instrument and module wiring requirements.

Maintenance and Replacement Notes

Verify the complete BMXAMI0810 reference. BMXAMI0800 also provides eight inputs but uses a non-isolated input architecture.

Back up the Control Expert project and document the rack, slot, ranges, scaling, filtering, diagnostics, wiring and firmware before replacing the module.

Firmware procedures must use the correct module rack and slot address. An incorrect target may interrupt another X80 module.

Related Models

Related analog input models include BMXAMI0410 and BMXAMI0800.

BMXAMI0810 should not be replaced with a temperature-input module or a lower-channel analog module without reviewing the complete project and field wiring.

Inquiry and Supply Notes

Please provide the module nameplate, CPU and rack references, rack and slot location, channel ranges, firmware revision, terminal-block model and Control Expert project status.

Product condition, firmware compatibility, terminal accessories, channel testing, availability and delivery time must be confirmed before quotation.