Product Overview

The Schneider ELAU 19202604V002001 is a PacDrive SM-070 synchronous servo motor with the complete configuration SM-070/60/020/P0/45/S1/B1.

The motor provides 1.20 kW catalog power, 6000 RPM rated-speed positioning, 2.0 Nm standstill torque and 7.7 Nm peak torque. It includes a smooth standard-steel shaft, SRS50 SinCos single-turn encoder with Hiperface interface and an integrated 2.5 Nm holding brake.

The wider SM-070/60/020 range includes brake and non-brake versions, keyed and smooth shafts, resolver and SinCos multiturn feedback, stainless-steel shafts, IP65 shaft protection, barrier-pressure IP67 variants and optional forced ventilation.

This configuration is intended for machine axes requiring both high-speed servo performance and stationary load holding. The exact brake-control sequence and mechanical load must be checked before replacement.

Main Features

• Exact commercial reference: 19202604V002001
• ELAU article number: 19202604-002
• Full configuration: SM-070/60/020/P0/45/S1/B1
• 1.20 kW catalog power
• 6000 RPM rated-speed positioning
• 2.0 Nm standstill torque
• 7.7 Nm peak torque
• Smooth 11 mm standard-steel shaft
• SRS50 SinCos single-turn encoder
• Hiperface feedback interface
• 2.5 Nm integrated holding brake
• 24 VDC brake coil
• IP64 shaft and IP65 housing
• Self-cooled motor construction
• Related variants available with keyed shafts, resolver or multiturn feedback, stainless-steel shafts, enhanced protection and forced ventilation

Technical Specifications

Compatible System and Applications

The 19202604V002001 is suitable for vertical packaging axes, lifting mechanisms, synchronized conveyors, printing equipment and other machines requiring precise motion with stationary load holding.

The keyed-shaft brake version 19202604V004001 is available for mechanical systems requiring a feather-key connection. Feedback alternatives include resolver version 19202604V006001 and SinCos multiturn version 19202604V010001.

Stainless-steel and enhanced-protection brake variants include 19202604V026001 and 19202604V050001. Forced-ventilation brake variants include 19202604V014001 and 19202604V062001.

Barrier-pressure IP67 brake versions such as 19202604V620001 and 19202604V622001 use SinCos multiturn feedback and require separate compatibility verification.

Maintenance and Replacement Notes

Confirm the B1 brake configuration and exact 19202604V002001 reference. The brake-free 19202604V501001 is not an automatic replacement.

Inspect the brake coil, brake release, feedback signal, shaft, bearings and thermal-monitoring circuit before installing a used or refurbished motor.

Verify the drive parameters, encoder interface, mechanical coupling, brake voltage, motor cable, feedback cable and machine brake-control sequence.

Forced-ventilation alternatives also require verification of the 230 VAC surface fan and available machine clearance.

Related Models

Representative brake-equipped and related variants include:

• 19202604V501001 — SM-070/60/020/P0/45/S1/B0, corresponding smooth-shaft SinCos version without brake
• 19202604V004001 — SM-070/60/020/P1/45/S1/B1, keyed shaft, SinCos single-turn feedback, with brake
• 19202604V006001 — SM-070/60/020/P0/45/R1/B1, smooth shaft, resolver feedback, with brake
• 19202604V010001 — SM-070/60/020/P0/45/M1/B1, smooth shaft, SinCos multiturn feedback, with brake
• 19202604V026001 — SM-070/60/020/P3/45/S1/B1, stainless-steel smooth shaft, SinCos single-turn feedback, with brake
• 19202604V050001 — SM-070/60/020/P0/55/S1/B1, smooth shaft, SinCos single-turn feedback, IP65 shaft protection, with brake
• 19202604V014001 — SM-070/60/020/P0/40/S1/B1/01, standard-steel forced-ventilation version with brake
• 19202604V062001 — SM-070/60/020/P0/50/S1/B1/01, enhanced-protection forced-ventilation version with brake
• 19202604V620001 — SM-070/60/020/P3/5A/M1/B1, stainless-steel smooth shaft, SinCos multiturn feedback, barrier-pressure IP67, with brake

Brake-equipped variants may differ in motor length, shaft form, feedback cable, environmental protection and cooling. The complete suffix must be retained during quotation.

Inquiry and Supply Notes

Please provide the motor nameplate, brake requirement, servo-drive reference, feedback and power cables, mechanical dimensions, axis orientation, cooling arrangement, protection requirement and machine model.

Brake testing, encoder testing, insulation condition, bearing condition, shaft condition, fan testing where applicable and delivery time must be confirmed before quotation.