Product Overview

The Schneider ELAU 19202604V501001 is a PacDrive SM-070 servo motor with the complete configuration SM-070/60/020/P0/45/S1/B0.

This permanent-magnet synchronous motor provides 1.20 kW catalog power, 6000 RPM rated-speed positioning, 2.0 Nm standstill torque and 7.7 Nm peak torque. It uses a smooth standard-steel shaft, SRS50 SinCos single-turn encoder with Hiperface interface and does not include a holding brake.

The SM-070/60/020 catalog family includes keyed and smooth shafts, standard-steel and stainless-steel construction, SinCos single-turn, SinCos multiturn and resolver feedback, brake and non-brake versions, IP64 and IP65 shaft-protection options, barrier-pressure IP67 configurations and forced-ventilation models with a documented 2.7 Nm ventilated standstill rating.

The 19202604V501001 is a representative self-cooled standard configuration. Related variants should only be selected after comparing the complete commercial reference and machine requirements.

Main Features

• Exact commercial reference: 19202604V501001
• ELAU article number: 19202604-501
• Complete configuration: SM-070/60/020/P0/45/S1/B0
• 1.20 kW catalog power
• 6000 RPM rated-speed positioning
• 2.0 Nm standstill torque
• 7.7 Nm peak torque
• Smooth standard-steel shaft
• SRS50 SinCos single-turn feedback
• Hiperface encoder interface
• Without holding brake
• IP64 shaft and IP65 housing
• Self-cooled construction
• Related catalog variants available with brake, resolver, multiturn feedback, stainless-steel shafts, IP65 or IP67 protection and forced ventilation

Technical Specifications

Compatible System and Applications

The 19202604V501001 is suitable for high-speed packaging, printing, labeling, cutting, conveying and material-handling equipment requiring approximately 2.0 Nm standstill torque.

The S1 SinCos single-turn feedback must match the servo drive and feedback cable. The resolver version 19202604V505001 and multiturn version 19202604V509001 use different feedback systems.

The keyed-shaft alternative 19202604V503001 is available where a DIN-keyed mechanical connection is required. Stainless-steel and enhanced-protection alternatives include 19202604V525001 and 19202604V549001.

For higher continuous torque under catalog ventilation conditions, 19202604V513001 is a forced-ventilation variant. Specialized barrier-pressure applications may use 19202604V623001, subject to complete feedback and mechanical verification.

Maintenance and Replacement Notes

Confirm the full SM-070/60/020/P0/45/S1/B0 configuration. The SM-070/60/010 motor has lower torque and a different body length and should not be treated as equivalent.

This model has no holding brake. Verify whether the machine axis requires a brake before ordering.

Forced-ventilation variants additionally require verification of the 230 VAC surface fan, fan clearance, fan wiring and motor length.

Check the shaft coupling, gearbox input, mounting flange, centering diameter, motor cable, feedback cable, servo drive and project configuration.

Related Models

Representative SM-070/60/020 variants include:

• 19202604V002001 — SM-070/60/020/P0/45/S1/B1, smooth shaft, SinCos single-turn feedback, with holding brake
• 19202604V503001 — SM-070/60/020/P1/45/S1/B0, keyed shaft, SinCos single-turn feedback, without brake
• 19202604V505001 — SM-070/60/020/P0/45/R1/B0, smooth shaft, resolver feedback, without brake
• 19202604V509001 — SM-070/60/020/P0/45/M1/B0, smooth shaft, SinCos multiturn feedback, without brake
• 19202604V525001 — SM-070/60/020/P3/45/S1/B0, stainless-steel smooth shaft, SinCos single-turn feedback
• 19202604V549001 — SM-070/60/020/P0/55/S1/B0, smooth shaft, SinCos single-turn feedback, IP65 shaft protection
• 19202604V513001 — SM-070/60/020/P0/40/S1/B0/01, standard-steel forced-ventilation version
• 19202604V561001 — SM-070/60/020/P0/50/S1/B0/01, enhanced-protection forced-ventilation version
• 19202604V623001 — SM-070/60/020/P3/5A/M1/B0, stainless-steel smooth shaft, SinCos multiturn feedback, barrier-pressure IP67 version

These references share the 1.20 kW SM-070/60/020 core but differ in shaft, feedback, brake, cooling and protection. Forced-ventilation and barrier-pressure models require additional installation checks.

Inquiry and Supply Notes

Please provide the complete nameplate, servo-drive model, motor and feedback cables, shaft and flange dimensions, brake requirement, cooling requirement, protection requirement and machine application.

Encoder testing, insulation testing, bearing condition, shaft condition, fan testing where applicable, product condition and delivery time must be confirmed before quotation.