Product Overview

The Yaskawa SGDV-5R5A01A is a Sigma-V series 750 W AC SERVOPACK for single-axis control of compatible 200 V rotary servo motors. It accepts analog voltage and pulse train commands and supports position, speed, and torque control for industrial automation equipment.

Main Features

• 750 W maximum applicable servo motor capacity
• Three-phase 200–230 VAC main circuit input
• 5.5 A continuous rated output current
• Analog speed and torque command inputs
• Pulse train position command support
• 1.6 kHz speed frequency response
• Sigma-V high-resolution serial encoder interface
• Integrated Safe Torque Off through HWBB
• Automatic tuning and vibration suppression

Technical Specifications

Compatible System and Applications

The SGDV-5R5A01A is intended for selected 200 V Sigma-V rotary servo motors rated up to 750 W. Compatible configurations may include appropriately rated SGMAV, SGMJV, SGMEV, SGMAH, SGMPH, and other approved motor families. Compatibility must be confirmed from the Yaskawa motor-drive combination table.

Typical applications include packaging systems, automated assembly lines, material handling equipment, printing machinery, pick-and-place mechanisms, feeders, indexing equipment, and precision machine axes.

Maintenance and Replacement Notes

Save the original parameters before removing the installed drive. Confirm the full SGDV-5R5A01A model, nameplate, firmware, hardware revision, controller project, command signals, electronic gearing, motor model, encoder format, brake option, regenerative circuit, and cable set.

SGDV-5R5A11A and SGDV-5R5A21A use different communication interfaces. SGDV-5R5A01A002000 and other extended-suffix models may also contain hardware or environmental options and should not be treated as identical without verification.

Related Models

Related models include SGDV-5R5A01A002000, SGDV-5R5A11A, SGDV-5R5A21A, SGDV-3R8A01A, and SGDV-7R6A01A. Compare the complete suffix, rated current, command interface, firmware, and motor requirements.

Inquiry and Supply Notes

Please provide the complete model and nameplate photographs, controller model, controller project, firmware revision, command interface, motor model, encoder type, brake configuration, regenerative resistor, cable part numbers, and original parameter backup. Product condition and included components should be confirmed separately.