FANUC A02B-0303-C074 10.4-Inch Color LCD Unit

Product Overview

The FANUC A02B-0303-C074 is a 10.4-inch color LCD operator-interface display identified as a B1 panel for FANUC 30i CNC control applications. This configuration is specified without an integrated touch panel.

The unit presents CNC status information, programs, alarms, parameters and machine-operation screens. It is normally installed as part of a complete machine operator station and should be selected by the exact FANUC part number rather than screen size alone.

Key Product Features

• 10.4-inch industrial color LCD display
• B1 operator-interface panel configuration
• Designed for FANUC 30i CNC control applications
• Non-touch display configuration
• Suitable for maintenance of an existing CNC operator station

Technical Identification

Typical Applications

• CNC machining-center operator stations
• CNC turning and milling machine displays
• Replacement of a failed or damaged LCD operator-interface unit
• Legacy FANUC 30i control maintenance

Related and Nearby Models

Related A02B-0303 display and operator-interface references include A02B-0303-C073, A02B-0303-C074, A02B-0303-C081, A02B-0303-C084, A02B-0303-C091 and A02B-0303-C092.

These neighboring models may differ in screen configuration, touch capability, panel generation, graphics functions, mounting arrangement and rear connectors. A02B-0303-C084 is frequently marketed as another 10.4-inch display variant, but its touch configuration is described inconsistently in the replacement market. None of these neighboring models should be treated as a direct substitute for A02B-0303-C074 without machine-level verification.

Ordering Checklist

• Confirm the exact part number A02B-0303-C074.
• Verify that the required configuration is B1 without touch.
• Compare all rear connectors and mounting points.
• Check the CNC control model and machine-builder configuration.
• Confirm whether the quotation covers the complete display unit.

Supply Condition Notice

New, new-surplus, refurbished and used units must be quoted separately. Product photographs, nameplate information and operating condition should be confirmed before shipment.