KSTAR 12V 200Ah 6-FM-200 Vrla Battery New Original High-quality Power Storage Batteries

►Brief Description

KSTAR 12V 200Ah 6-FM-200 Vrla Battery prevents air from entering the battery while protecting the battery from damage caused by gas escaping during charging. The sealed battery does not produce acid mist and electrolyte in the floating charge state. At the same time, the patented battery tray can match the battery to prevent electrolyte leakage from damaging the battery. The battery adopts true online double conversion technology controlled by DSP, and simulates LCD display to display multi-function parameter settings and operating status. The battery can ensure normal power supply in the harshest environment.

►Specification

►KSTAR 12V 200Ah 6-FM-200 Vrla Battery Installation and Connection

1. Safety Protection

Wear insulating gloves and goggles to avoid direct contact with battery acid (although it is a sealed battery, it may leak in extreme cases).

Make sure there is no exposed metal on the tools to prevent short circuits.

2. Installation Environment

Good ventilation: Avoid using in confined spaces to prevent hydrogen accumulation (although VRLA batteries are leak-proof, they may exhaust when hot or overcharged).

Temperature Control: The best operating temperature is 20°C~25°C, avoid direct sunlight or near heat sources (high temperature will shorten life).

Secure: Secure the battery with a bracket or strap to avoid vibration or tilting (especially when used in vehicles or mobile equipment).

3. Connection

Series/Parallel

Series: When connecting multiple batteries, connect the positive pole to the negative pole to increase the voltage (for example: 2 batteries in series are 24V).

Parallel connection: connect positive to positive and negative to negative to increase capacity (for example: 2 batteries in parallel is 400Ah).

Note: When connecting in parallel, make sure the batteries are of the same model and age to avoid imbalance.

Wiring sequence

First connect the series/parallel wires in the battery pack.

Finally connect the positive and negative poles of the system (positive first, then negative; vice versa when disassembling).

Torque requirement: The recommended torque for the terminal screws is 8~10 N·m. Overtightening may damage the terminals.

►Why choose KSTAR 12V 200Ah 6-FM-200 battery?

1. Large capacity and long battery life

The 200Ah ultra-large capacity design provides strong and sustained power output, easily handling long-term power outages and high energy consumption scenarios. Ideal for home energy storage, off-grid solar power systems and emergency power sources.

2. VRLA valve-regulated sealing technology

Adopting advanced valve-regulated lead-acid (VRLA) construction, it is fully sealed to prevent leakage and there is no risk of acid leakage. It can be used safely in indoor environments. No regular watering or maintenance is required, saving you time and effort.

3. Fast charging, low self-discharge

Optimized plate technology improves charging efficiency by 30%, coupled with a low self-discharge rate (monthly self-discharge < 3%), the battery can stay in standby even after months of non-use.

4. Deep cycle durability design

Supports deep discharge (DOD reaches 80%), has a cycle life of more than 1,200 times, is resistant to vibration and shock, and can adapt to harsh environments, protecting high-intensity scenarios such as industrial equipment and communication base stations.

5. Stable operation in a wide temperature range

The wide operating temperature range of -20℃ to 50℃ allows it to maintain high efficiency even in severe cold and heat, keeping your power supply online in extreme climates.

Looking forward to your early inquiry, if you have any questions about KSTAR 12V 200Ah 6-FM-200 Vrla Battery New Original High-quality Power Storage Batteries, please let me know.