Mux & Demux ABS Module 8CH CWDM for Telecom Network Communication WDM
China Manufacturer Mux & Demux ABS Module 8CH CWDM for Telecom Network Communication WDM
Product Introduction
ABS box CWDM is one of the most commonly used packaging methods. It features a strong ABS plastic shell protection, with customizable input/output cable length and connector types according to your requirements. This flexible design allows installation in rack mounts, fiber distribution boxes, and various network environments.
The ABS Box CWDM module is available in 4 Channel, 8 Channel, 12 Channel, 16 Channel, or 18 Channel configurations. Both single and dual CWDM multiplexers can be packaged in ABS boxes. Contact our sales team for more information.
Key Features
- Low Insertion Loss
- High Isolation
- High Reliability and Stability
- Low PDL
- Compact Design
- Good channel-to-channel uniformity
- Wide Operating Wavelength: 1270nm-1610nm (1261nm~1611nm)
- Wide Operating Temperature: -20 to +70℃
Applications
- CWDM System
- Add/Drop
- PON Networks
- CATV Links
Certifications
Performance Specifications
| Parameter |
4 Channel |
8 Channel |
18 Channel |
| Channel Wavelength (nm) |
1270~1610 |
| Center wavelength Accuracy (nm) |
±0.5 |
| Channel Spacing (nm) |
20 |
| Channel Passband (@-0.5dB bandwidth (nm)) |
>13 |
| Insertion Loss (dB) |
≤1.2 |
≤2.5 |
≤3.8 |
| Channel Uniformity (dB) |
≤0.5 |
≤1.0 |
≤1.5 |
| Channel Ripple (dB) |
0.3 |
| Isolation (dB) - Adjacent |
N/A |
>30 |
>30 |
| Isolation (dB) - Non-adjacent |
N/A |
>40 |
>40 |
| Maximum Power Handling (mW) |
300 |
| Operating Temperature (°C) |
-20~+70 |
| Storage Temperature (°C) |
-40~85 |
Above specifications are for device without connector.
Ordering Information
| CWDM |
Channel Spacing |
Number of Channels |
Configuration |
1st Channel |
Fiber Type |
Fiber Length |
In/Out Connector |
| C=CWDM |
16=16 Channel |
M=Mux D=Demux |
13=1310nm 47=1470nm 49=1490nm 61=1610nm SS=special |
1=Bare fiber 2=900um Loose tube 3=2mm Cable 4=3mm Cable |
1=1m 2=2m S=Specify |
0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=LC/APC 6=LC/PC S=Specify |