Tire Pressure Maintenance System Tire Pressure Sensor 
           Commercial Vehicle - Multi Wheels Bluetooh Low Energy Tire Pressure Monitoring System
                   	 		 			|  			 1.8Working Voltage  			 |  			 			 1.8V~3.6V  			 |  		
 		 			|  			 Working Humidity  			 |  			 			 95% MAX  			 |  		
 		 			|  			 Working Current  			 |  			 			 < 18 mA  			 |  		
 		 			|  			 Storage Temperature  			 |  			 			 - 40℃ ~125℃  			 |  		
 		 			|  			 Working Temperature  			 |  			 			 - 20℃ ~ 105℃  			 |  		
 		 			|  			 Tire Pressure Monitoring Range  			 |  			 			 0 ~ 185psi (0 ~ 1280kPa)  			 |  		
 		 			|  			 Tire Temperature Monitoring Range  			 |  			 			 - 40℃ ~ 105℃  			 |  		
 		 			|  			 RF Frequency  			 |  			 			 2.4 GHz  			 |  		
 		 			|  			 RF Power  			 |  			 			 8 dBm MAX  			 |  		
 		 			|  			 Battery Life  			 |  			 			 >3 years (12hrs/day)  			 |  		
 		 			|  			 Battery Capacity  			 |  			 			 345 mAh (CR2050)  			 |  		
 		 			|  			 Sensor Weight  			 |  			 			 < 16.5g ± 0.5g (including battery)  			 |  		
 	 
   
  installation Accessories:
   
  Installation
   
  Accessories
  BLE TPMS Sensor Accessories
  
        
      
                                                                             Wrench
                                                       It is suggested to leave the wretch in the vehicle.
   
   
  Installation steps:
  
      Rotate Lock-Nut into bottom of valve.
   
      
   
    
       
  Rotate Sensor to valve until no air leakage and lock. 
  Use wrench to reverse tighten Lock-Nut onto the Sensor.
  
   
   
       
                   Lock-Nut                                     Counter clockwise
  
  
   
  
  Apply soap water on valve stem nut to check whether produce
  bubble and air leakage. No bubbling means correct installation.
  In case there is bubbling, please re-install according to the
  procedure.