The TYPE-C 6PFS 4J-H7.5 IPX8 is a high-quality USB Type-C connector designed for robust performance and durability. It features IPX8 water resistance, making it suitable for applications requiring protection against moisture and immersion. This connector supports DC20V 3A rating and operates reliably within a temperature range of -30C to 80C.
| Item | Test Conditions | Performance Specification | Unit |
| Mechanical | Connection Force | 0.51-2.04 | Kgf |
| Disconnection Force | 0.51-2.04 | Kgf | |
| Terminal Strength | Static Load of 0.1N/m (1kgf/cm) for 1 min | No damage, cracks, looseness or play. Satisfy electrical and mechanical characteristics. | |
| Contact Resistance | Measured at small current (100mA or less) 1000Hz | 40 | m MAX |
| Insulation Resistance | Apply voltage of 100V DC for 1 min (Body to conductor, between conductors not to be contact, between conductors not to be contact when plug is inserted) | 100 | M MIN |
| DC100V 1 MIN | |||
| Dielectric Strength | AC 100V ims (50~60Hz) for 1 min, Trip current: 0.5mA (Body to conductor, between conductors not to be contact, between conductors not to be contact when plug is inserted) | Without damage, arcing or breakdown | |
| DC 100V 1 MIN | |||
| Solderability Test | Top of terminals dipped 1mm in solder bath of 2505 for 50.5 seconds | Solder wetting time 3 seconds, Soldering area > 75% | |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180, 120s. Peak temp: 2605 within 20 seconds. | No deformation of case or excessive looseness of terminals. Satisfy electrical and mechanical characteristics. | |
| Reflow Soldering Conditions | |||
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, Application time 30.5 seconds. No excessive pressure. | No deformation of case or excessive looseness of terminals. Satisfy electrical and mechanical characteristics. | |
| Soldering Iron Method | |||
| Humidity Test | Stored at 402 and 90% to 96% RH for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | No damage on appearance. Satisfy mechanical and electrical characteristics. | |
| Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 Hr. | No damage on appearance. Satisfy mechanical and electrical characteristics. | |
| Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 Hr. | No damage on appearance. Satisfy mechanical and electrical characteristics. | |
| Life Test (Without Load) | Connection and disconnection for 10000 cycles at a speed of 10 to 25 cycles/min. | Cycles | |
| 10000 | |||
| Life Test (With Load) | Load: Rating condition (Non-inductive load). Connection and disconnection for 10000 cycles at a speed of 10 to 20 cycles/min. | Contact Resistance 0.1, Disconnection Force 0.8 to 2.0N, Satisfy mechanical and electrical characteristics. | |
| Temperature Cycling Test | 5 cycles of conditions (Temp(): 80 to 0, Hours: 0.5 each). Return to room ambient for 30 minutes. | No deformation or cracks. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | |
| Cold & Heat Shock Test | 5 cycles of conditions (Temp(): 70 to -20, Hours: 1 each). Return to room ambient for 30 minutes. | No deformation or cracks. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). | |