This specification covers the production and inspection of the 1501 Series connector, designed for various electronic applications. It offers reliable electrical and mechanical performance within a specified temperature range and is suitable for use with PC boards of 1.2mm to 1.6mm thickness. The series supports wire sizes from AWG#22 to #28.
| Part | Material | Plating | Color | Rating | Temperature Range | PCB Thickness | Wire Gauge |
| Housing | PA66 (UL94V-0) | N/A | Natural | 250V AC/DC, 2A | -25~85 | 1.2mm~1.6mm | N/A |
| Housing | Nylon46 (UL94V-0) | N/A | Beige | N/A | N/A | N/A | AWG#22~#28 |
| Housing | PBT (UL94V-0) | N/A | White | N/A | N/A | N/A | N/A |
| Terminal (Contact) | Phosphor bronze (0.15mm) | Tin Plating: 3~4m | N/A | Insulation Resistance: 1000M, Dielectric Strength: 800V AC/minute | N/A | N/A | N/A |
| Terminal (Contact) | Phosphor bronze (0.30mm) | Tin Plating: 3~4m | N/A | Contact Resistance: 10m | N/A | N/A | N/A |
| Terminal (Contact) | Phosphor bronze (0.30mm) | Gold Plating: 3~4m | N/A | N/A | N/A | N/A | N/A |
| Terminal (Solder tabs) | Phosphor bronze (0.25mm) | Tin Plating: 3~4m | N/A | N/A | N/A | N/A | N/A |
| Category | Item | Requirement |
| Electrical Performance | Rated Voltage | 250V AC/DC |
| Rated Current | 2A | |
| Contact Resistance | 10 m | |
| Insulation Resistance | 1000M | |
| Mechanical Performance | Male contact Retention force | 10N per pin |
| Female contact Retention force | 10N per pin | |
| Plug-in force | 3N per pin | |
| Plug-out force | 0.5N per pin | |
| Endurance Characteristics | Soldering rest | Time: 2.50.5S, Temperature: 2305, Area of Soldering: 95% |
| Resistance to soldering Heat | Time: 51S, Temperature: 2305, Appearance: No Damage | |
| Heat test | Time: 96h, Temperature: +853, Appearance: No Damage, Contact resistance: 20 m | |
| Cold test | Time: 48h, Temperature: -253, Appearance: No Damage, Contact resistance: 20 m | |
| Temperature Cycling | Low temp: -253, High temp: 853, 5 cycles, Appearance: No Damage, Contact resistance: 20 m | |
| Constant humidity | Temperature: 602, RH: 90%-96%, Time: 96h, Appearance: No Damage, Contact resistance: 20 m, Insulation Resistance: 100M | |
| Salt Spray | Concentration: 51%, Temperature: 352, Time: 162h, Appearance: No Damage, Contact resistance: 20 m |
(1) Inner packaging: Plastic bag for plastic parts, panel mounting for terminals. Marked with product name, specification model, quantity, production date. (2) Exterior packaging: Carton with packing list. Marked with product name, specification model, quantity, dispatch date. (3) Product must not rock in the box.
Allow for any transportation method. Protect from moisture and mechanical damage.
Store in a warehouse with ambient temperature between -10 to +40, relative humidity 80%. Avoid acidic, alkaline, and other corrosive gases.