Continuous Production Pallet Flipper / Accurate Mold Turnover Machine

Pallet Flipper Introduction

Pallet Flipper mainly used in turnover for plywood, veneer, etc. while producing. Needn’t turn over the panels by manual, which can save labour cost and increase the production efficiency.

Its' construction welded by steel which is more stable and firm.

The hydraulic cylinder is stable and even, it is easy to control,and the clamping force can be adjusted.

Controlling button and indicator light all set on the control panel, which is easy to operate.

High quality with reasonable price.
2. Automatic system and easy to operate.
3 .Comprehensive after-sales service

Main features:

1. The double-row chain drive makes the turning part of the turning machine work more smoothly and reliably.
2. Using super worm gear reducer makes the transmission power of the equipment more safe and reliable.
3. The four-wheel mechanism with reasonable structure has a stable bearing.
4. When the 180° is turned over, the double protection switch device (mechanical limit switch and electric limit switch limit) is used to make the turning machine safer.
5. When the raft is up and down, the flip table is stable.
6. After the flip is completed, the flip ends to automatically stop.
7. Using the emergency stop button makes it possible to quickly stop the flip in an emergency.
8. The unit can be stopped at any position during the flipping process.
9. Products centered into the center of the turning machine working platform
10. The unique flip surface design ensures that the product fits close to the flipping body, and the turning operation is smooth and safe.
11. Use a jacking or lowering mechanism.
12. Using synchronous mechanical structure to ensure uniformity and stability of the whole machine.
13. Product nature: Pressure does not damage the product itself.

The main parameters:
Basic data of products:

1. plate material: stainless steel SUS201
2. Steel plate size: length 1250mm, width 780mm, height 100-500mm;
3. Pallet size: 800mm × 700mm × 120mm;
4. Steel plate and tray integrated;
5. The entire material weight is around 500KG-3000KG.
6. Turning machine size: about 2000mm * 900mm * 1650mm.
7. Machine weight: about 2.5T.
8. Power supply: 380V, three-phase five-wire.

Main configuration

Main performance indicators

Equipment spraying
1) Machine: Egg Green GSB05-1426-2001 (instead of GSB G51001-94)
2) The warning part is yellow