Sorbitan Monooleate is a yellow, oily liquid, a nonionic surfactant with an HLB value of 4.3. It is dispersible in warm water and ethanol, and readily soluble in organic solvents such as propylene glycol, liquid paraffin, methanol, and ethyl acetate. It is a typical water-in-oil emulsifier.

It exhibits excellent emulsifying, dispersing, and stabilizing properties, and is widely used in the pharmaceutical field. It can be used as a solubilizer and emulsifier for injections and oral liquids, as well as a capsule dispersant, ointment emulsion base, and suppository base. It can also be used as a food industry emulsifier, possessing good compatibility, chemical stability, and resistance to acids, alkalis, and hard water. It is often used in combination with Tween surfactants and is widely applied in medicines, food, daily chemicals, and industrial emulsification.

• Product Name: Sorbitan Monooleate (Span 80)
• Other Names: Sorbitan Oleate, Sorbitan Monooleate, Span 80, Emulsifier Span 80
• Chemical Composition: Sorbitol fatty acid esters
• Type: Nonionic surfactants
• CAS: 1338-43-8

Packaged in 200kg plastic drums, store and transport as general chemicals. Store in a dry, well-ventilated place. Shelf life: 2 years.

• Slightly soluble in water, soluble in hot oil and organic solvents; a high-grade lipophilic emulsifier.
• Used in W/O type latex explosives, nylon and viscose cord oiling agents, providing excellent smoothing effects on fibers.
• Used in emulsification in machinery, coatings, chemicals, and explosives.
• Used as an emulsifier in oil drilling mud; in food and cosmetics production; as a dispersant in the paint and coating industry.
• Used as a stabilizer in titanium dioxide production; as an pesticide, wetting agent, and emulsifier in pesticide production.
• Used as a co-solvent in petroleum products; and also as a rust inhibitor in rust-preventive oils.
• Used as a lubricant and softener in textiles and leather.
• As a film anti-fogging agent, it has good initial and low-temperature anti-fogging properties. The dosage in PVC is 1~1.5%, and in polyolefins, it is 0.5~0.7%.