• Engine conforming to National Stage II emission standards, optimal power system, improved lifting capability, higher productivity and fuel efficiency.
• With enlarged bucket, the productivity is improved by 12%.
• 18MPa hydraulic system pressure provides high efficiency and energy saving; single lever enables less efforts and convenient operation.
• Enlarged wheelbase, heavier counterweight, higher load capacity, and rear-mounted fuel tank, provides higher stability and the refueling is more convenient.
• Reliability of transmission and front and rear axle is improved; the service and maintenance is convenient.
• Brand new design of cooling system meets the requirements for -20℃ ~ +43℃ ambient conditions. Optional cooling system for 50℃ ambient conditions is also available.
• Full hydraulic coaxial flow amplification steering system improves steering pressure and enables more quick and easy steering.
• Vibration absorption device is mounted with the engine, which further improves the seal performance and reduces vibration and noise.
• Working pump steering pump, and SAE/DIN standard high pressure hoses are made at Caterpillar’s Wuxi plant, and the pipeline layout is optimized.
• Brake booster and brake chamber are moved to the central left service section of the machine, which is more convenient for service and maintenance.
|
Model |
SEM660B |
|
Bucket Capacity |
3.3-5.5 m3 |
|
Rated Load Capacity |
6000 kg |
|
Operating Weight |
19600 kg |
|
Max. Drawbar Pull |
187 kN |
|
Max. Breakout Force |
190 kN |
|
Max. Gradeability |
30° |
|
Min. Turning Radius (Outside of Bucket) |
7050 mm |
|
Min. Turning Radius (Outer Tire) |
5940 mm |
|
Cycle Time (Bucket lifting, tipping and lowering) |
10.2 s |
|
Dump Height |
3050 mm |
|
Dump Reach |
1280 mm |
|
Wheelbase |
3350 mm |
|
Standard Dimensions (L×W×H) (mm) |
8510 ×3092×3410 |
|
Engine |
|
Model |
Sinotruck Steyr D10.24T21National Stage II emission standards |
|
Type |
In-line, vertical, water cooling, 4-stroke |
|
Rated Power |
175 kW |
|
Max. Torque |
950 Nm |
|
Drive System |
|
Torque Converter |
YJ375 |
|
Type |
Single stage, 3 elements, centripetal type |
|
Transmission Type |
Fixed axle, constant engaged power shift |
|
Speed Gears |
4 forward, 4 reverse |
|
Max. Speed |
40.9 km/hr |
|
Front/Rear Drive Axle |
4WD, fixed front axle, swing rear axle(±12°) |
|
Steering System |
|
Type |
Articulated frame, load sensing, Coaxial flow amplification steering |
|
Steering Angle (left/right) |
38°±1 |
|
Hydraulic System |
|
Hydraulic System Pressure |
18 MPa |
|
Operation Mode |
Hydraulic pilot proportional control |
|
Brake System |
|
Service Brake |
Air-over-oil 4-wheel caliper disc brake |
|
Parking & Emergency Brake |
Pneumatic internal expanding shoe brake |
|
Tires |
|
Size |
23.5-25PR |
|
Volume |
|
Fuel Tank |
273 L |
|
Hydraulic System |
165 L |
|
Optional Devices |
|
|
Shangchai SCllCB240.1G2B1 National Stage II emission standards |
|
|
Weichai WD10G240DE21 National Stage II emission standards |
|
|
Rock bucket with inclined cutting edge/rock bucket/sand bucket/side dump bucket |
|
|
Log grab/coal bucket and long reach arm |
|
|
Desert tires |
|
|
ROPS/FOPS/Warning light |
|
|
Quick coupler and tools |