• Engine conforming to National Stage II emission standards, optimal power system, improved lifting capability, higher productivity and fuel efficiency.
• 19MPa hydraulic system pressure provides high efficiency and energy saving; single lever enables less efforts and convenient operation.
• Heavier counterweight, higher load capacity, and rear-mounted fuel tank, provides higher stability and the refueling is more convenient.
• Electronic controlled fixed axle type transmission produced with Caterpillar technology brings industry leading reliability and durability.
• Front and rear axle independently made by CQL features high brake efficiency, high reliability and durability.
• Brand new design of cooling system meets the requirements for -20℃ ~ +43℃ ambient conditions. Optional cooling system for 50℃ ambient conditions is also available.
• Increased steering pressure makes more quick and easy steering.
• Vibration absorption device is mounted with the engine, which further improves the seal performance and reduces vibration and noise.
• Working pump steering pump, and SAE/DIN standard high pressure hoses are made at Caterpillar’s Wuxi plant, and the pipeline layout is optimized.
• Brake booster and brake chamber are moved to the central left service section of the machine, which is more convenient for service and maintenance.
• Luxurious cab, seat, air conditioner and optimized operation control system.
| Model |
SEM669C |
| Bucket Capacity |
3.3-5.5 m3 |
| Rated Load Capacity |
6000 kg |
| Operating Weight |
19600 kg |
| Max. Drawbar Pull |
185kN |
| Max. Breakout Force |
190 kN |
| Max. Gradeability |
30° |
| Min. Turning Radius (Outside of Bucket) |
7050 mm |
| Min. Turning Radius (Outer Tire) |
5990 mm |
| Cycle Time (Bucket lifting, tipping and lowering) |
10.2 s |
| Dump Height |
3050 mm |
| Dump Reach |
1280 mm |
| Wheelbase |
3350 mm |
| Standard Dimensions (L×W×H) (mm) |
8510×3092×3440 |
| Engine |
| Model |
Shangchai SC11CB240.1G2B1 National Stage II emission standards |
| Type |
In-line, vertical, water cooling, 4-stroke |
| Rated Power |
175 kW |
| Max. Torque |
950 Nm |
| Drive System |
| Torque Converter |
YJH340B |
| Type |
Single stage, 3 elements, centripetal type |
| Transmission Type |
Electronic controlled fixed axle type |
| Speed Gears |
4 forward/3 reverse gears |
| Max. Speed |
30.6 km/h |
| Front/Rear Drive Axle |
4WD, fixed front axle, swing rear axle(±12 °), turbocharging |
| Steering System |
| Type |
Coaxial flow amplification steering |
| Steering Angle (left/right) |
38°±1 |
| Hydraulic System |
| Hydraulic System Pressure |
18 MPa |
| Operation Mode |
Hydraulic pilot proportional control |
| Brake System |
| Service Brake |
Dry type air-over-oil caliper disc brake |
| Parking & Emergency Brake |
Pneumatic internal expanding shoe brake |
| Tires |
| Size |
23.5-25PR |
| Volume |
| Fuel Tank |
274L |
| Hydraulic System |
230L |
| Optional Devices |
| Rock bucket with inclined cutting edge/rock bucket/sand bucket/side dump bucket |
| Log grab/coal bucket and long reach arm |
| Enlarged tires 26.5-25/Desert tires |
| ROPS/FOPS |
| Quick coupler and tools |