Length Fiberglass Fiber Snake Cable Duct Rodder Push Rod For Telecom Optical Fiber Cable Pulling And Cleaning
FRP rod information
Frame and reel information

Data Sheet
| 1 - Glass Reinforced Composite core: | ||||||||
| General properties | ||||||||
| Property | Value | |||||||
| Iner core | E-Glass Fiber | |||||||
| Glass Content of Inner Part | 75-80% | |||||||
| Material of Pulling Rod | Epoxy fiber glass (inner) | |||||||
| High density Polyethylene(outer) | ||||||||
| Density | >1.9 gr/cm3 | |||||||
| Diameter Tolerance | ± 0.10mm | |||||||
| Work situation temperature | - 40 0C to +800C | |||||||
| Mechanical properties | ||||||||
| Property | Value | |||||||
| Minimum pulling strength | 4000 N±5% | |||||||
| Tensile Modulus | >30000 Mpa | |||||||
| Consistency of rod | 150gr/m±5% | |||||||
| Flexural Modulus | >30000 Mpa | |||||||
| Elongation at Break | 2.5-3% | |||||||
| 2 - Polyethylene cover | ||||||||
| Material: | ||||||||
| Medium Density Polyethylene Resin for the insulating and jacketing of Telecommunication Cables. | ||||||||
| Property | Value | |||||||
| Tensile Strength | >15N/mm2 | |||||||
| Environmental Stress & crack resistance | >1000 hr. | |||||||
| Heat Stability | OK. | |||||||
| Carbon Black | OK. | |||||||
