Charger Aging Cabinet Constant Temperature Power Adapter Aging Check Rack
| Skills requirement | Burn-in cabinet size(mm) | L2400*W1200*H1600 |
| Rated working voltage | 460Vac | |
| Rated insulation voltage | 690Vac | |
| Rated frequency | 50Hz | |
| Rated working current | 8.3A | |
| Power frequency withstand voltage for 1 minute | 2500Vac | |
| AC input specifications | 460Vac/8.3A | |
| AC output specifications | 364Vac/8.35Amax | |
| Temperature rise | Complies with the provisions of IEC 947-1 on temperature rise, and the tempera ture rise value does not exceed thecorresponding standard requirements of the | |
| Master switch | 4way 100A | |
| Input switch | 24way 16A | |
| Output switch | 24way 16A | |
| IP rating | IP20 | |
| Noise | <70dB (measured at a distance of 1m from the device) | |
| Structural requirements | Dimension(mm) | 2400(W)*1200(D)*1600(H) |
| Burn-in slot layout requirements | The bottom of the cabinet with 3 layers and 8 Burn-in slots on each floor needs to be reserved for 40CM installation inductance | |
| Docking method | Connector supports 600VAC, 16A hard connection | |
| Cabinet door | Double door | |
| Maintenance method | Before and after maintenance |