Continuous Auto Slitter , Electrode Making
Functions and features
- Continuous slitter is an auto device to slit the whole roll of electrode sheets lengthways to required width through material filling,slitting,dust removal material collecting and rolling
- .Unwinding tension control adopts imported automatically close-loop tension control system so as to achieve unwinding under the same pressure.Winding adopts slip shaft.Real-time roll diameter calculation and tapered tension control ensure tension uniformity of every slitting product and uniformity of winding
- .Assistant mechanism for pushing in and out tool apron is adopted to make convenient and fast to load and unload the tool apron
- Scrap material is pulled independently and automatically.Tension is controlled independently.Scrap materialis absorbed and collected under negative pressure
- .Dust removal system:when slitting,every upper blade is in vacuum cleaning independently.After slitting,two sets of anti-static hairbrushes brush powder and vacuum cleaning.At the same time,little dusting flour will be removed.Silentindustrial dust collector is equipped
- Control system:PLC,servo motor,tension controller and pneumatic components,etc are famous imported products
Technical parameters
Item |
Common parameter |
Slitting electrode sheet material width |
50~250μm |
Slitting speed |
1~80m/min |
Slitting width |
800mm |
Material feeding width |
800mm |
Life of slitting blade |
The life of theupperdagger is 60-150 thousand meters for every grinding which its total life is 360-900thousand meters
The life of theowe flat blade is 400-600 thousand meters for every grinding which its total life is 1.2-1.8 million meters
|
Burr |
Plane(horizontal)s0.012mm,Transverse plane(longitudinal)s0.007mm |
Slitting width precision |
±0.05mm |
Edge straightness |
≤0.05mm/m |
Unwinding correction precision |
±0.1mm |
Unwinding correction journey |
±75mm |
Unwinding tension control |
0~200N |
Winding uniformity |
±0.2mm |
Max winding and unwinding roll diameter |
Unwinding Φ800mm, Winding Φ800mm
|
Max load-bearing of winding and unwinding shaft |
Material filling shafts 300kg, Material collecting shafts 150 kg |