NFC Recognition Swing Gate Turnstile Phone Tap Entry Encrypted Card Reader For Office Lobbies

Product Introduction

This swing gate turnstile reads NFC credentials, so the entrance opens with a tap instead of a card slot, a keypad or a camera. Employees hold a 13.56MHz NFC card, a wristband, a key fob or a phone against the reader area on the pedestal, the controller validates the encrypted sector in a fraction of a second and the acrylic swing arms open in 0.5 seconds. Because the credential is read by radio rather than by light, the lane works when the visitor is wearing gloves, carrying a bag, standing in a dim garage lobby or holding a phone with the screen switched off, and there is no card slot to jam or wear out after heavy daily use. The reader accepts encrypted CPU card sectors, so a copied or cloned card is rejected, and the controller keeps a local credential list so the lane continues to open when the network or the server is unavailable. One lane passes 30 persons per minute in controlled mode and 40 persons per minute in normally open mode, which suits office lobbies, gyms, campus buildings, residential towers and factory shift entrances.

Product Features and Advantages

1. Tap And Go With Card, Wristband Or Phone

A single tap on the reader area is enough: the credential can be an NFC card, a wristband, a key fob, a token or an NFC-enabled phone. There is no app to open, no PIN to type and no card to insert, so a person with a bag in one hand still passes in one movement and the queue at the entrance keeps moving.

2. Encrypted NFC To Block Cloned Cards

The controller reads encrypted sectors of CPU cards and checks the key before it opens the lane, so a duplicated or copied card is refused and the event is logged. This is the difference between a simple ID card reader and a credential system that can be trusted at a staff entrance or a restricted floor.

3. Reliable In Dim Light, Wet Hands Or Gloves

NFC reading does not depend on lighting, on a clean camera lens or on a dry fingerprint, which makes the lane dependable in basement lobbies, outdoor gates, cold stores and factory areas where staff wear gloves. The cabinet is rated IP43 or IP54 with a working range of -30 C to 70 C.

4. 0.5 Second Opening And 40 Persons Per Minute

The brushless motor opens the swing arms in 0.5 seconds and the lane passes 30 persons per minute in controlled mode, or 40 persons per minute in normally open mode for shift changes and class breaks. Two LED indicator lights show green arrow or red cross so people choose a free lane without asking the guard.

5. One Controller For NFC, Cards, QR Code And Face

The same controller also accepts RFID, IC and ID cards, QR codes, fingerprint and face recognition terminals, plus remote release from the guard room. Relay switch signals, 12V level and pulse signals, RS485 and TCP/IP connection let the lane report every tap to an existing access control or attendance platform.

Frequently Asked Questions

1. Which NFC standards and cards are supported?

The reader works with 13.56MHz NFC credentials, including Classic, CPU cards, plus NFC wristbands, key fobs and NFC phones. Low frequency 125kHz ID cards can be supported with an additional reader module if your site already uses them.

2. Can visitors and staff use their phone instead of a card?

Yes. An NFC-enabled phone can be enrolled as a credential, and the phone does not need to unlock the screen or open an app for the tap. For sites that prefer app-based credentials, the same reader can be combined with a QR code reader on the controller.

3. How does the lane prevent copied cards?

The controller verifies the encrypted sector and the card key before opening, so a cloned card without the correct key is rejected and the attempt is recorded. Card keys can be changed by the administrator, and lost cards can be removed from the local list and the platform at the same time.

4. Does the lane keep working if the network goes down?

Yes. The controller stores the valid credential list locally and continues to validate taps offline, then uploads the stored records when the connection returns. Fire alarm release and manual key release work independently of the network.

5. What are the MOQ, price and delivery time?

Minimum order quantity is 1 pc, the reference price is USD470 to USD940 per lane depending on the reader and controller configuration, and delivery takes 5-14 working days. Cabinet size, channel width from 550mm to 800mm and stainless steel finish can be customised.