Plug Socket Test Equipment Device for Testing Non-solid Pins for IEC60884-1 Figure 14 With 100N Weight
Standard:
IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes –Part 1: General requirements’ clause 14.2, figure 14
Application:
Pins of portable accessories shall have adequate mechanical strength. This device is use to test the mechanical strength of Pins of portable accessories. Plug Socket Test Equipment
Test sample:
Non-solid pins
Feature:
A force of 100 N is exerted on the pin, which is supported as shown in figure 14, for 1 min in a direction perpendicular to the axis of the pin, by means of a steel rod having a diameter of 4.8 mm, the axis of which is also perpendicular to the axis of the pin.

Parameters:
| Steel rod | Φ4.8mm |
| Weight | 100N |
| Operation | Manual rotating the wheel so that the pin bearing pressure |
| Test time | 1 min. |
| Standard | IEC60884-1, Plug Socket Test Equipment |